dent on bonnet- self fix

[02audis3]

Have a soft dent on bonnet paint is fine. about 5 inch any ideas?

Last option is a dent place,

 

[mike_plymouth]

Richard Hammond Technique?

 

[Free]

bit of wood then slam it

 

[vetch]

http://www.wisebread.com/remove-car-dents-quickly-and-cheaply

No less ridiculous than the first two suggestions!

 

[S3 OGS]

I am a dent guy,Cut the glue on the bracing underneath where the dent is.Dent should pop out.Reseal the bracing job done. Save your self about £100. Well that's what i would charge anyway :icon_thumright:

 

[02audis3]

Very Intresting. http://www.wisebread.com/remove-car-...ly-and-cheaply number2.

Were would i source a can of to try this. worth a go

 

[Broken Byzan]

on the bay, it's where i am looking as we type. I have a dent on my roof that i would like gone, and at a fiver its worth a bash

http://shop.ebay.co.uk/i.html?_trkp...1&_nkw=air duster&_trksid=p3286.c0.m14&_pgn=1

 

[02audis3]

Nice, http://www.maplin.co.uk/Module.aspx?ModuleNo=25351
Q- Can i use this Air Duster to remove dents in my car. Apparently if you heat the dent area with a hairdryer then spray with an 'air duster containing carbon dioxide' the dent will come out. Is it possible to use this product? see link http://www.youtube.com/watch?v=0oQpks0ZsUM thanks - N
Answer- This should be absolutely fine

Thats from malpins selling it.

 

[Keeno]

Saw this ages back. Can't help but think it's a little opstimistic that a change in heat like that will have the force to pop a dent. added to that the fact the metal actually stretches when it gets a dent in it (which is why you'll never get a fairly serious dent completely flat again)...

 

[Lemon S3]

Apparently you can also use popcorn lol

 

[Keeno]

Apparently you can also use popcorn lol

Fill the car with it and put the heaters on until the dent pops put from the pressure on the inside?

lol-lerskates

 

[Lemon S3]

Fill the car with it and put the heaters on until the dent pops put from the pressure on the inside?

lol-lerskates

Something like that, this guy literally threw it into the wing through holes where the door hinges are and turned the engine on. Not sure if its a joke or not lol.
http://www.youtube.com/watch?v=E9n0kEXL-sw&feature=related

 

[CMD]

No way, popcorn will never push out a dent on a Audi panel, you need a good dent guy. ... popcorn

 

[S3 NPD]

take it a bodyshop and get it done properly. lol :icon_thumright:

 

[S3 OGS]

I love the way how i have given free advise on how to repair the dent for yourself and nobody has acknowledged what i have wrote.

O the joy of the forum

www.dentwizardmidlands.co.uk

Here is my website if anybody wants to check out some of the large dents i have repaired before

 

[Lemon S3]

I love the way how i have given free advise on how to repair the dent for yourself and nobody has acknowledged what i have wrote.

I did but I like the idea of having popcorn at the same time

 

[JD09]

Guys the heat up, cool down rapidly DOES NOT WORK. Tried it, it failed, cursed the £5 I spent on CO2.

 

[Lemon S3]

Guys the heat up, cool down rapidly DOES NOT WORK. Tried it, it failed, cursed the £5 I spent on CO2.

It does work but just depends on what kind of dent it is.

 

[JD09]

Tried it on my Clio, father's S4 and RS4, mums cars, few colleague and friends cars and no luck. Really did try it to death!

 

[chancer]

I love the way how i have given free advise on how to repair the dent for yourself and nobody has acknowledged what i have wrote.

O the joy of the forum

www.dentwizardmidlands.co.uk

Here is my website if anybody wants to check out some of the large dents i have repaired before

Personally I would use your services or similar in the area. Doing something like this without prior experience or knowledge would be too risky for me.
pro type service (like yours) without question
Nice pictures and work on the repairs by the way