Sure am! Also I know trim never goes back a squeak free as before LOL. Sorry, cant remember fault code, something about intermitant power supply etcThats cause ur a lazy rse, lol
What error you getting mate for future ref.
Cant remember how I did it but its not for the faint hearted as it's held on by spring clips that make a horrible cracking noise. I remember removing the trim that runs along the back where the warning triangle is. There could be a nut under it to be removed for the side trim? The back seat had to go forward. Then there is lots of prying to pop the trim off, especially up near the seabelt area. Sorry I cant be of more help.
A assumed that the wire i used was permenate but turned out not to be. Will need to study wiring digrams again.
I went straight to fusebox & checked the fuse that factory fitment used & either piggybacked existing wire it should of used or used the unused fuse slot with a repair wire, you really need elsawin for this job mate to do properly as latching onto existing fuses without knowing the load could cause you more trouble than worth, so do it properly & you'll appreciate it later, trust me.
I'll bet you will ;-)but will install again soon as have some wiring to do, lol.
pfft, i grude more than £6 for a spicy chicken pizza with plenty of green chilies! LOLNah cause waste of £25/30 as would of bought to much food & some vino, so cook food in kitchen so not a lazy fecker, lol.
maybe thats the problem. There was a problem running something, but maybe etka under vista?
Have you run the admin program 1st & created a new user? Login with admin & pasword admin. You need to create a new user (NOT another admin!) 1st before you try running Elsa
Also, if your not getting that far have you tried right clicking on the application (not link) & run as an administrator? My elsa is on my pc in my office that is running xp but its only 3.5 :-( LOL