09 White Cluster/DIS fitted to 04 8P

is that blue LED lights on an A3/S3 cluster? That would look nice on my Akoya A3 LOL

No that's in a Golf cluster. This is an 08 S3 cluster doing its sweep.

[ytv]TfC24YQOcsE[/ytv]
 
Didnt know I could do this John matey, is it an adaptation or coding option, learn something new everyday, its a gimmick though huh, but hey puts smile on yer face & for me probably laugh my **** of as I do when I see headlight washers work, hey its the small things

It's available on S3 clusters, not sure about yours though. To enable it try looking in the DIS Menu > Set > Indications > Dials (tick/untick).
 
No that's in a Golf cluster. This is an 08 S3 cluster doing its sweep.

[ytv]TfC24YQOcsE[/ytv]

cheers, had wondered - there are quite a few surface mounted LED's needing changed to get that effect! I see there is a guy on german ebay that does various switches in blue.
 
It's available on S3 clusters, not sure about yours though. To enable it try looking in the DIS Menu > Set > Indications > Dials (tick/untick).

Nah not on mine, but I remember some additional adaptations I think for S3, R8 with was it laptimes aswell, that rings a bell, somethings got me thinking, goes to consult the Oracle...............

If you have some spare time on your hands, here's a little project for you.....

[ytv]1Wnu7OFZ0hQ[/ytv]

http://www.fallastarmedia.com/ledproj.htm

Now I like that, nice mod
 
If you have some spare time on your hands, here's a little project for you.....

[ytv]1Wnu7OFZ0hQ[/ytv]

http://www.fallastarmedia.com/ledproj.htm


oooo that looks nice!

those leds with the needle sweep at the beginning would be awesome!



As for the whole cluster change, the instructions you gave seem complicated but saying that you are changing from the older 8P... would it be just a plug and play swap with some extra coding on a 55plate A3?
 
As for the whole cluster change, the instructions you gave seem complicated but saying that you are changing from the older 8P... would it be just a plug and play swap with some extra coding on a 55plate A3?

Read it again then as it states what to do for pre & facelift cars
 
For 11/04 & onwards cars, subject to checking of course, it should really be just as simple as get the new cluster & take to audi to be swapped coded to the car, cause you should have the new wire already & also the newer pump, again you can check this by looking up the pump part for your vin & also remove the cluster to see if that pin is wired already, simple way to see if the wire on pin 25 is functional, just remove the pin from the 32 connector & reinsert cluster to car & start car & the fuel level shouldnt show, according to my test anyway on newer cluster.

Ahh now i see... i read the first paragraph and my brain just gave up:faint:

NHN... i see you all over this forum... where abouts are you in UK if you dont mind me asking?
you seem to know your bits on the A3
 
South East

I know some things, but there are many on here that know just as much if not much more than me, keeps me busy anyway
 
I may have said I lived in SA for a year at some stage, in East Sussex.
 
I'm selling one now for KMH funny enough, available from tomorrow as I now have an MPH version, so Mr Influx this would be ideal for you huh mate as your kmh arent you.

Audi charge £600+ for the new cluster.

I of course want alot less & can send to anywhere in world, PM if interested.
 
Diesel, but tbh whats your rev counter go upto at the moment, if its same as my original post with images then I hazard a guess it would work with some petrol cars, only one way to find out & your choice not mine.
 
I dont think it could work, my revs top up at 8k atm so i guess it wouldn`t fit :(
 
I'm selling one now for KMH funny enough, available from tomorrow as I now have an MPH version, so Mr Influx this would be ideal for you huh mate as your kmh arent you.

Audi charge £600+ for the new cluster.

I of course want alot less & can send to anywhere in world, PM if interested.

:applaus: back of a lorry?
 
Only if the crashed car hit one, lol
 
Uh read the thread title, what do you think!!!
 
you setting up a shop? LOL

What clocks are going into your when finished engine mod?

Haha no...Bought them a few months back and just cleaned my room and found them again lol. I wanted S3 clocks but need to speak to nigel see how difficult it will be.
 
oooh, forums up again!

I looked at 2008 clocks on ebay too but I was also concerned that the speedo might be out too over and above the need for mileage & immob needing addressed.
 
oooh, forums up again!

I looked at 2008 clocks on ebay too but I was also concerned that the speedo might be out too over and above the need for mileage & immob needing addressed.


Yeah i can remember us talking about those ones before. Take it was down all day yesterday i thought it was just me lol! I'll have to address all that closer to the day or i could just get standard A3 petrol ones that should be alot easier.
 
Hi chaps, great thread on this mod, I was wondering if 8P0 920 982 J is a straight swap and will work ok on my 06 Diesel Sportback?

Thanks in advance!
 
J does show as a 160mph diesel from mid 09 so I cant atm see why not & yours has the extra fuel sender wire so should just need fitting, based on I havnt looked at a my10 wiring so much but think its the same.
 
so as this is possible, does it mean that it is possible to retro fit dis into a car that has no dis?

or is that a whole differant can of worms?


Yes it can be done there are a few post Sharkperformance has done some " It the price of a secondhand cluster !! Still waiting for one at the right price
 
@NHN

I know an Audi master technician who does cluster swaps etc for Golfs, he did my old car for me and he is very knowledgeable when it comes to this stuff. I have sent him a PM about mileage correction for you. He should know whats what. He just plays with clusters to see what mods can be done.

Joe
 
@NHN

I know an Audi master technician who does cluster swaps etc for Golfs, he did my old car for me and he is very knowledgeable when it comes to this stuff. I have sent him a PM about mileage correction for you. He should know whats what. He just plays with clusters to see what mods can be done.

Joe
 
I know it possible to change mileage and pull the SKC on the pre-09 clusters by means other than Audi. I'm not sure if these companies can do the 09 on yet though one in Glasgow said to NHN that they could.
 
I will be gettin mine done soon on my 09 cluster, just been lazy! Been quoted £80.
Thanks to your keen eye, I have my very own facelift one :cool:.

Out of interest, do you know what they would take to do immob compared to Audi?

Was saying to N on Friday, I was suprised that all the extra DIS functions worked without needing to change my rev A network controller etc.
 

Similar threads

Replies
0
Views
52K
Replies
73
Views
7K
NHN
Replies
0
Views
4K
NHN