Looking for testers for the new liquid A3/S3 8P

[freegeek]

I just finished the latest update for the liquidxx to support the 8P chassis, I have been able to test it on my 1.9TDi and a friends 2.0TDi but need to try it in a std petrol and turbo petrol.

If anyone is around the fife/edinburgh area and has 10 mins to spare it would be much appriciated.

Here is a video of a test run tonight (cut short due to my camera battery going flat) but it give a good idea about its operation.

http://www.youtube.com/watch?v=bGoONTn1Y_w

 

[mhill]

Looks like a top product, unfortunately not local enough to be able to help.

 

[AuldReekie]

Very interesting product mate. For the trial are you looking to hardwire or run a cable from the port?

I will point a few people from up your way in the direction of the thread as I don't plan being back up the road for a while yet.

 

[freegeek]

Just plan a quick test with the unit plugged into the OBD diagnostic port, that is the only wiring it comes with.

 

[N8]

Freegeek, I'm S10 TYG from TT Forum, I know this is a great product! Well done.

 

[phil76]

I have been wanting one of these for ages,how much will it be freegeek when all tested ok? i will test one if you post it me down to sheffield but then again you might not get it back.I take it this will also be going to work with all the mk5 golf software also ?

 

[N8]

i will test one if you post it me down to sheffield but then again you might not get it back

No place in the world like Yorkshire

 

[mdre83]

looks like a cracking product mate.

As Phil says, how much will these go for once testing is complete?

 

[phil76]

No place in the world like Yorkshire

N8KOW is there anything i can borrow of yours over a long time scale?

 

[freegeek]

The kit of bits to fit into your own vent will be £170, they should be on the web site by the week end.

 

[AuldReekie]

A quick Q: will it only be available as airvent mount or can it be boxed and dash mounted? Thanks again.

 

[freegeek]

Hi, it also comes like this in a handheld / magnetic suction mount housing called the liquidCUBE.

 

[DeckedS3]

Darn, I was in Edinburgh yesterday too.... Could of been fun to play with!

 

[N8]

N8KOW is there anything i can borrow of yours over a long time scale?

 

[Khufu]

I've N/A petrol but I'm half roads between Glasgow & Ayr. Not sure if I can get over to east coast any time soon

 

[J.R.]

Hi, it also comes like this in a handheld / magnetic suction mount housing called the liquidCUBE.

I like the faq that you can use this as a Mount. I don't like the idea of sacrificing a air vent just to display something. How Much does this one cost ? Screen does look a little small thou still.....

 

[freegeek]

Its £200 for the liquidCUBE.

 

[Khufu]

would be even better channelled through the RNS-E :icon_thumright:

 

[J.R.]

would be even better channelled through the RNS-E :icon_thumright:

lol Yeh That would be sick!!!!

 

[AuldReekie]

Now that would suit me better. I will keep an eye on the progress, thanks.

 

[freegeek]

Thers no pleaseing some people

 

[N8]

would be even better channelled through the RNS-E :icon_thumright:

Thers no pleaseing some people

 

[Khufu]

Thers no pleaseing some people

'fraid not LOL


Well done getting working for the 8P though

 

[AuldReekie]

Thers no pleaseing some people

Was that for me? I didn't really look at the posts above mine and should have quoted you I suppose. For the record: I meant that your boxed version would suit me better, not the RNSE, hence I thanked that post.

:icon_thumright:

 

[mdre83]

I like the faq that you can use this as a Mount. I don't like the idea of sacrificing a air vent just to display something. How Much does this one cost ? Screen does look a little small thou still.....

You could mount it in one of these...

OSIR - O-Pod Mono

OSIR - O-Pod Dual - Gloss Carbon-Black

OSIR - O-Pod Dual - Gloss Carbon-Silver

 

[cooni]

would be even better channelled through the RNS-E :icon_thumright:

Maybe integrating control of the unit through the RNS-E would be hard, but you could (moderately painlessly, I suppose) have a composite video output via an RCA cable that can be plugged into video inputs using a multimedia adapter?

 

[freegeek]

Well it took the best part of a year to get it working on the petrol 8P but its now working on the new liquid mk2

 

[KRL]

Fantastic product mate well done!

I have some questions:
1. The S3 has a chrome surround for the air vent. Will you be including this as on the website it only looks to be available with with the plastic surround.
2. Do you have any plans to integrate this into RNS-E? To me that would be the perfect product.
3. Do you have any pics of this with the black fascia?

 

[FranA3]

Well it took the best part of a year to get it working on the petrol 8P but its now working on the new liquid mk2

hi freegeek i love the look of this product will it be avail for my car its a 1.6fsi petrol or will it work on any non turbo a3 thanks in advance

 

[akash_sky1]

I may be interested in being a guinea pig when I am back up in Glasgow in early Jan, do you get a big discount if your a tester?!

 

[dc240969]

Im along the road near Leven if you need a tester.