not to sure on the cosmetic now the trims on the lower part of the doors are light painted grey which looks really good in real life the pictures dont quite show it off, so im thinking of doing the roof and spoiler the same colour other then that its all i have planned for it, for now lolKev what other plans you got for the S3 cosmetics wise.. i like the wheels.. something Ive never seen on an A3/S3 before.
Shy
im going make my own thread so will list what i have done in there, but the cars on ap coilovers with every thing taken out the back so its basically just the springsWhat else have you done now?
More pics please lol
How did you get it to sit so low at the back?
What set up you got?
The guy who owned the grey A3 used to be a member on here. That car went through multiple different phases and was finally yellow prior to being being painted grey. There are threads on here covering the work he did...
im going make my own thread so will list what i have done in there, but the cars on ap coilovers with every thing taken out the back so its basically just the springs
The guy who owned the grey A3 used to be a member on here. That car went through multiple different phases and was finally yellow prior to being being painted grey. There are threads on here covering the work he did...
what make coilovers do you have?? as mine have plastic cups that the spring sits in at the bottom so i removed the lower part of the bump stops cut all the rubber off then bonded the stops to the plastic cups which are only around 2mm thick then i completely removed the rubber spring cussion bit at the top side to where the spring sits in on the body and didnt fit the adjuster, all in all i removed around 12-15mm of unwanted stuff which made the difference, as long as you leave the tower part of the bump stop in at the bottom and it cant just fall out then the springs will fit in there fine as they cant go any where once under load.so you took the hight adjuster from under the spring out?
i tried that but the spring didn't seem to sit on the rubber good?
when are you starting your thread?
what make coilovers do you have?? as mine have plastic cups that the spring sits in at the bottom so i removed the lower part of the bump stops cut all the rubber off then bonded the stops to the plastic cups which are only around 2mm thick then i completely removed the rubber spring cussion bit at the top side to where the spring sits in on the body and didnt fit the adjuster, all in all i removed around 12-15mm of unwanted stuff which made the difference, as long as you leave the tower part of the bump stop in at the bottom and it cant just fall out then the springs will fit in there fine as they cant go any where once under load.
im doing my thread on the weekend or monday once i can get around to taking pics but doubt weather ill take any of the springs etc
yeah no worries with me unless you want to pm me as we are hijacking this thread lolCan i put a pic up n u show me what to remove?
I have kw v3 collovers
thanks
Thinking about it. I think a set of these wheels would do that car justice. Nice centre hubs me thinks.