- Joined
- Oct 21, 2004
- Messages
- 3,405
- Reaction score
- 95
- Points
- 48
is that blue LED lights on an A3/S3 cluster? That would look nice on my Akoya A3 LOL
No that's in a Golf cluster. This is an 08 S3 cluster doing its sweep.
[ytv]TfC24YQOcsE[/ytv]
is that blue LED lights on an A3/S3 cluster? That would look nice on my Akoya A3 LOL
Didnt know I could do this John matey, is it an adaptation or coding option, learn something new everyday, its a gimmick though huh, but hey puts smile on yer face & for me probably laugh my **** of as I do when I see headlight washers work, hey its the small things
No that's in a Golf cluster. This is an 08 S3 cluster doing its sweep.
[ytv]TfC24YQOcsE[/ytv]
is that blue LED lights on an A3/S3 cluster? That would look nice on my Akoya A3 LOL
It's available on S3 clusters, not sure about yours though. To enable it try looking in the DIS Menu > Set > Indications > Dials (tick/untick).
If you have some spare time on your hands, here's a little project for you.....
[ytv]1Wnu7OFZ0hQ[/ytv]
http://www.fallastarmedia.com/ledproj.htm
If you have some spare time on your hands, here's a little project for you.....
[ytv]1Wnu7OFZ0hQ[/ytv]
http://www.fallastarmedia.com/ledproj.htm
If you have some spare time on your hands, here's a little project for you.....
[ytv]1Wnu7OFZ0hQ[/ytv]
http://www.fallastarmedia.com/ledproj.htm
As for the whole cluster change, the instructions you gave seem complicated but saying that you are changing from the older 8P... would it be just a plug and play swap with some extra coding on a 55plate A3?
needle sweep - I mot Bikes, thats old hat LOL
For 11/04 & onwards cars, subject to checking of course, it should really be just as simple as get the new cluster & take to audi to be swapped coded to the car, cause you should have the new wire already & also the newer pump, again you can check this by looking up the pump part for your vin & also remove the cluster to see if that pin is wired already, simple way to see if the wire on pin 25 is functional, just remove the pin from the 32 connector & reinsert cluster to car & start car & the fuel level shouldnt show, according to my test anyway on newer cluster.
I'm selling one now for KMH funny enough, available from tomorrow as I now have an MPH version, so Mr Influx this would be ideal for you huh mate as your kmh arent you.
Audi charge £600+ for the new cluster.
I of course want alot less & can send to anywhere in world, PM if interested.
Uh read the thread title, what do you think!!!
I have 08 S3 dials and 09 dials for sale if any one interested
you setting up a shop? LOL
What clocks are going into your when finished engine mod?
oooh, forums up again!
I looked at 2008 clocks on ebay too but I was also concerned that the speedo might be out too over and above the need for mileage & immob needing addressed.
so as this is possible, does it mean that it is possible to retro fit dis into a car that has no dis?
or is that a whole differant can of worms?
Thanks to your keen eye, I have my very own facelift one .I will be gettin mine done soon on my 09 cluster, just been lazy! Been quoted £80.