- Joined
- Nov 23, 2008
- Messages
- 724
- Reaction score
- 81
- Points
- 28
I have posted the following thread regarding my coming home - leaving home lights and after some great support from you guys I have sorted my problem but also created another one:-
http://audi-sport.net/vb/showthread.php?t=64651
I have now enabled my leaving home lights via 09 cent elect byte o, bit 5
but this has created a problem in that I have now lost my DRL's. My headlights come on instead of my DRL's!!!!!
My light switch has three positions 1) DRL (which when turned on now turns on my headlights) 2) side lights (works ok) and 3) headlights (works ok). I don't have rain sensor or auto headlights.
I have a facelift 58 plate Audi A3 cabriolet with Halogen lights. The DRLs appear to be LED lights below the headlight next to the indicator light section.
I have tried every everything I can possibly see to try and activate these but admit i'm now lost and to be honest a bit in experienced with this and don't want to dable to much.
I have also looked in 09 cent elect Byte 21, Bit 0-2 and in the drop down list my car is on Halogen lights. There appears to be a selection for xenons and DRL driving lights but not for halogens and DRL lights as shown below:-
I have a fully registered Hex can lead and have donloaded the latest vds software.
Can anyone help me get my DRL's to work. It must be a coding thing but I can't find it.
If anyone can help but needs further info then please let me know.
my VDS scan is as follows:-
Wednesday,21,January,2009,16:11:58:51997
VCDS Version: Release 805.2
Data version: 20090111
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Chassis Type: 1K0
Scan: 01 03 04 08 09 15 16 17 19 25 26 42 44 46 47 52 56 62 72
VIN: TRUZZZ8PxxxxxXXX Mileage: 3600km/2236miles
01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
26-Auto Roof -- Status: OK 0000
42-Door Elect, Driver -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
46-Central Conv. -- Status: OK 0000
47-Sound System -- Status: OK 0000
52-Door Elect, Pass. -- Status: OK 0000
56-Radio -- Status: OK 0000
62-Door,Rear Left -- Status: OK 0000
72-Door, Rear Right -- Status: OK 0000
-------------------------------------------------------------------------------
--------
Address 09: Cent. Elect. Labels: 8P0-907-279-30-H.lbl
Part No SW: 8P0 907 279 N HW: 8P0 907 279 N
Component: Bordnetz-SG H54 2801
Revision: 00H54000 Serial number: 00000008558454
Coding: AD202F01B0141080EF00001C0000000000094E0164010203002000000000
Shop #: WSC 01236 785 00200
Part No: 8P2 955 119 F
Component: Wischer AU350 H10 0040
Coding: 00056595
Shop #: WSC 01236
No fault code found.
-------------------------------------------------------------------------------
--
Thanks in advance
Neil
http://audi-sport.net/vb/showthread.php?t=64651
I have now enabled my leaving home lights via 09 cent elect byte o, bit 5
but this has created a problem in that I have now lost my DRL's. My headlights come on instead of my DRL's!!!!!
My light switch has three positions 1) DRL (which when turned on now turns on my headlights) 2) side lights (works ok) and 3) headlights (works ok). I don't have rain sensor or auto headlights.
I have a facelift 58 plate Audi A3 cabriolet with Halogen lights. The DRLs appear to be LED lights below the headlight next to the indicator light section.
I have tried every everything I can possibly see to try and activate these but admit i'm now lost and to be honest a bit in experienced with this and don't want to dable to much.
I have also looked in 09 cent elect Byte 21, Bit 0-2 and in the drop down list my car is on Halogen lights. There appears to be a selection for xenons and DRL driving lights but not for halogens and DRL lights as shown below:-
I have a fully registered Hex can lead and have donloaded the latest vds software.
Can anyone help me get my DRL's to work. It must be a coding thing but I can't find it.
If anyone can help but needs further info then please let me know.
my VDS scan is as follows:-
Wednesday,21,January,2009,16:11:58:51997
VCDS Version: Release 805.2
Data version: 20090111
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Chassis Type: 1K0
Scan: 01 03 04 08 09 15 16 17 19 25 26 42 44 46 47 52 56 62 72
VIN: TRUZZZ8PxxxxxXXX Mileage: 3600km/2236miles
01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
26-Auto Roof -- Status: OK 0000
42-Door Elect, Driver -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
46-Central Conv. -- Status: OK 0000
47-Sound System -- Status: OK 0000
52-Door Elect, Pass. -- Status: OK 0000
56-Radio -- Status: OK 0000
62-Door,Rear Left -- Status: OK 0000
72-Door, Rear Right -- Status: OK 0000
-------------------------------------------------------------------------------
--------
Address 09: Cent. Elect. Labels: 8P0-907-279-30-H.lbl
Part No SW: 8P0 907 279 N HW: 8P0 907 279 N
Component: Bordnetz-SG H54 2801
Revision: 00H54000 Serial number: 00000008558454
Coding: AD202F01B0141080EF00001C0000000000094E0164010203002000000000
Shop #: WSC 01236 785 00200
Part No: 8P2 955 119 F
Component: Wischer AU350 H10 0040
Coding: 00056595
Shop #: WSC 01236
No fault code found.
-------------------------------------------------------------------------------
--
Thanks in advance
Neil