Very Late Notice But Thought Some People Might Be Interested!

[P40ULW]

I know this is abit of a late one but i thought it might be worth telling you about it. Theres a RWYB rolling road happening tomorrow with some pretty good rates. It's just north of coventry about 1 1/2 hours from manchester heres a link to their address on google maps:

https://www.google.co.uk/maps/place...2!3m1!1s0x487750167f21b4ff:0xc1535567384858f6

heres the event they have advertised on Facebook:

https://www.facebook.com/Dynodaze

and the rates are as follows:

£30 = 2 x power runs and a printout
£40 = 2 x power runs with afr or boost logs and a printout
£50 2 x power runs with boost and afr logs and a printout

From the pictures it is only a 2WD dyno but i thought it might have been worth mentioning.

I might head down to this to see what the S1 is running if i can make it, would anyone else be interested? I've sent a PM to @Arrkon as its in his region does anyone know who the other midlands regional rep is?

 

[Gazwould]

The only way you can find out how good your map is.

 

[antowens]

I know this is abit of a late one but i thought it might be worth telling you about it. Theres a RWYB rolling road happening tomorrow with some pretty good rates. It's just north of coventry about 1 1/2 hours from manchester heres a link to their address on google maps:

https://www.google.co.uk/maps/place/Phoenix Business Park/@52.539406,-1.404062,17z/data=!3m1!4b1!4m2!3m1!1s0x487750167f21b4ff:0xc1535567384858f6

heres the event they have advertised on Facebook:

https://www.facebook.com/Dynodaze

and the rates are as follows:

£30 = 2 x power runs and a printout
£40 = 2 x power runs with afr or boost logs and a printout
£50 2 x power runs with boost and afr logs and a printout

From the pictures it is only a 2WD dyno but i thought it might have been worth mentioning.

I might head down to this to see what the S1 is running if i can make it, would anyone else be interested? I've sent a PM to @Arrkon as its in his region does anyone know who the other midlands regional rep is?

Is the S1 a 4wd not 2
I always assumed quattros were 4WD

 

[P40ULW]

The only way you can find out how good your map is.

Map?

Is the S1 a 4wd not 2
I always assumed quattros were 4WD

Yes it is but you can disconnect the haldex sensor from the rear diff usually

 

[antowens]

Yes it is but you can disconnect the haldex sensor from the rear diff usually

So it would then be 2WD would that not make the dyno run not true ? As in like may get a bigger or lesser figure then what it is in 4wd

 

[antowens]

Quite interesting that though didn't realise you could disconnect the 4WD i always thought that it was constant

 

[P40ULW]

So it would then be 2WD would that not make the dyno run not true ? As in like may get a bigger or lesser figure then what it is in 4wd

Not too sure if I'm honest? Ive just seen/read about others doing it that way :/

 

[Sandra]

I know this is abit of a late one but i thought it might be worth telling you about it. Theres a RWYB rolling road happening tomorrow with some pretty good rates. It's just north of coventry about 1 1/2 hours from manchester heres a link to their address on google maps:

https://www.google.co.uk/maps/place/Phoenix Business Park/@52.539406,-1.404062,17z/data=!3m1!4b1!4m2!3m1!1s0x487750167f21b4ff:0xc1535567384858f6

heres the event they have advertised on Facebook:

https://www.facebook.com/Dynodaze

and the rates are as follows:

£30 = 2 x power runs and a printout
£40 = 2 x power runs with afr or boost logs and a printout
£50 2 x power runs with boost and afr logs and a printout

From the pictures it is only a 2WD dyno but i thought it might have been worth mentioning.

I might head down to this to see what the S1 is running if i can make it, would anyone else be interested? I've sent a PM to @Arrkon as its in his region does anyone know who the other midlands regional rep is?

Rob (arrkon) is the only regional rep. Not all areas have 2

 

[P40ULW]

Rob (arrkon) is the only regional rep. Not all areas have 2

Ok thanks @Sandra

 

[Arrkon]

We have previously held a RR day at dynodaze, but it wasn't taken up all that much.

They do only have a 2WD dyno, which is fine for the Haldex boys, as the controller can be unplugged. However for myself and the S4/RS4/RS6 guys, we cant do that as we're permanent 4wd.