Got a seat belt extender last week, I was originally planning on getting an RS2 latch as it is longer. Audi said this would be £57 and it turned out they were obsolete anyway now. At the back of my mind I wanted a latch to feed through the side of my seat like I saw at Goodwood on the Megane 275 since it has the same seats. I found a soft adjustable length extender for a tenner on Amazon and it works a treat. Much better than having the belt go over the top of my seat.
I also fitted a momo race steering wheel I had lying about at the weekend. I have a momo hub kit and an NRG one. I fitted the nrg one along with a 50mm spacer. The momo horn ring is slightly bevelled so it doesnt fit into the hub or the spacer. So I have fitted the horn but its a few mm sunken into the wheel. I will get the spacer machined so I can fit the horn ring.
The momo race wheel is 320mm and the standard Audi one is 370mm. I plan to get a new wheel eventually which will be 350mm but just wanted to try the one I have to see if it worked and if I liked it before spending £160.
I softened off the coilovers while it was sunny on Saturday. The recommendation from KW is medium-hard:
http://docs.kwsuspension.de/ea-KWESAV3-68580040.pdf
Front
Bump 5 from hardest (Max 16)
Rebound 6 from hardest (Max 20)
Rear
Bump 5 from hardest (Max 12)
Rebound 12 from hardest (Max 16)
I found it a bit hard and over the yellow lines they have coming up to some junctions at the end of motorways the car was very harsh.
So I have set mine for now to:
Front
Bump 10 from hardest (Max 16)
Rebound 12 from hardest (Max 20)
Rear
Bump 8 from hardest (Max 12)
Rebound 14 from hardest (Max 16)
Car is still pretty firm but not nearly as bad, I have only driven around 20 miles though. I am glad I have drilled the holes so I can adjust the rebound on the car.