dannyAshcroft89
Registered User
Does anyone know if when tuning the s3 if you need to change anything and what are the top end for bhp and torque on remap, what cam we push these to on standard inturnals??
Audi s3 tuning 8p
- Thread starter dannyAshcroft89
- Start date
- Joined
- Mar 17, 2011
- Messages
- 3,543
- Reaction score
- 881
- Points
- 113
- Location
- Lanark, Scotland
- Website
- www.brotek.co.uk
Can I just say there are lots and lots and lots and lots of threads on here about tuning S3's, what to fit and what are the best remaps etc etc. If you use the search function you will have hours of endless reading.........guaranteed
dannyAshcroft89
Registered User
Tbh I wanted direct infomation as I am very busy and I also get severe head aches when looking at screens for too long, but thanks
Compkiler
Registered User
Ok for the lazy peeps out there :-D
http://www.audi-sport.net/vb/a3-s3-sportback-8p-chassis/106134-time-build-thread-big-turbo.html
Take a look at this thread bud, but a stage 1 is between 305 and 315bhp... no other mods needed...
Stage 2 is exhaust and cold air intake and then remap stage 2...
stage 2+ is as above but with high pressure fuel pump and stage 2+ remap
http://www.audi-sport.net/vb/a3-s3-sportback-8p-chassis/106134-time-build-thread-big-turbo.html
Take a look at this thread bud, but a stage 1 is between 305 and 315bhp... no other mods needed...
Stage 2 is exhaust and cold air intake and then remap stage 2...
stage 2+ is as above but with high pressure fuel pump and stage 2+ remap
- Joined
- Dec 3, 2008
- Messages
- 10,887
- Reaction score
- 4,888
- Points
- 113
Many thanks my friend.
If it becomes a sort of reference then I've given back a good bit of what ASN and VAGOC have given me.
To Danny .....
It will give you direct info but may give you and your wallet a headache.
If it becomes a sort of reference then I've given back a good bit of what ASN and VAGOC have given me.
To Danny .....
It will give you direct info but may give you and your wallet a headache.
dannyAshcroft89
Registered User
- Joined
- Dec 3, 2008
- Messages
- 10,887
- Reaction score
- 4,888
- Points
- 113
Good luck and enjoy the thread.
This place can give you a lot of help and save a heap of time and money if used properly.
Of course it can also help you to spend loads.
With respect to your original question ....
360-380 bhp is the ragged edge of the stock turbo.
Engine internals are good for 440bhp/440lbs but you need a lot of money to get there and beyond.
Stg2+ is the best bang for your buck.
RS3dan
Registered User
Alex, do you ever take your S3 out and about as such, I've read your build thread and see so many references to it as a great example of what can be done with an S3 I feel I need to see this beast lol
Uprated clutch is needed after or at stage 1 for a manual, an uprated intercooer is nice but not essential for squeezing the most amount of power and remeber if the car is a older model the DV will probably need updating to the latest revision!
- Joined
- Dec 3, 2008
- Messages
- 10,887
- Reaction score
- 4,888
- Points
- 113
Hi Dan,
It's my everyday drive....out and about and has to be reliable.
It does spend a fair bit of time having holidays at AMDTuning as well.
- Joined
- Dec 3, 2008
- Messages
- 10,887
- Reaction score
- 4,888
- Points
- 113
After driving mine with stage 2+ for the first time, id say stage 1 is a waste of time.
A stage 2+ S3 is a bit of an animal!!
I guess most of us start,there,and I certainly did,but it leaves you wanting more.
STg2+,as I often say,is the best overall value for the S3.....plenty of torque and usable power,and not gob-smackingly expensive.
