Usual Suspect
Registered User
Hi Everyone
Am in process of upgrading the A3 with Xenon Headlight
The Car is a 2010 Facelift A3 2.0 TDI Right hand drive which currently has halogen lights
The Bi Xenon headlights I have acquired are the following:
Nearside Headlight 8P0 941 003 1ZS 009 648-17
Driver side Headlight 8P0 941 004 1EL 009 648-10
Pictures:
The Current headlights fitted to the car are the following part numbers:
Nearside Headlight 8P0 941 003 1LJ 009 648-03
Driver side Headlight 8P0 941 004 1LJ 009 648-04
See Pictures:
The car currently has the following CECM (Central Electronics Board) in place 8P0 907 279N
In my understanding this CECM will support the headlight Upgrade
The instrument cluster installed in the car is the following part number: 8P0 920 982 C
I do not wish to install the headlight levelling or washers as yet. For now i just want to get the headlights to work without any errors displayed on the dash
Can some one please point me to the a link or a supplier who can send me the correct adapters for the upgrade
And also advise me on the best way of getting these 2 wires threw the bulk head that go to the CECM and where in the board these 2 wires go.
According to my research this is all i need to do to get them working correctly without any errors,
Have i missed anything?
Many Thanks
Am in process of upgrading the A3 with Xenon Headlight
The Car is a 2010 Facelift A3 2.0 TDI Right hand drive which currently has halogen lights
The Bi Xenon headlights I have acquired are the following:
Nearside Headlight 8P0 941 003 1ZS 009 648-17
Driver side Headlight 8P0 941 004 1EL 009 648-10
Pictures:
The Current headlights fitted to the car are the following part numbers:
Nearside Headlight 8P0 941 003 1LJ 009 648-03
Driver side Headlight 8P0 941 004 1LJ 009 648-04
See Pictures:
The car currently has the following CECM (Central Electronics Board) in place 8P0 907 279N
In my understanding this CECM will support the headlight Upgrade
The instrument cluster installed in the car is the following part number: 8P0 920 982 C
I do not wish to install the headlight levelling or washers as yet. For now i just want to get the headlights to work without any errors displayed on the dash
Can some one please point me to the a link or a supplier who can send me the correct adapters for the upgrade
And also advise me on the best way of getting these 2 wires threw the bulk head that go to the CECM and where in the board these 2 wires go.
According to my research this is all i need to do to get them working correctly without any errors,
Have i missed anything?
Many Thanks
Last edited: