TQS progress thread, From STD-Scroll-Eliminator.
- Thread starter Broken Byzan
- Start date
not got them yet, they are at Kevs still because he collected them from Ian for me to store them till Christmas is out of the way so couriers are back to being sensible.
The engine is still in bits and turbo broken and interior empty, Looks like a scrap car atm
The engine is still in bits and turbo broken and interior empty, Looks like a scrap car atm
TBH i am not sure, there has been mention of alternative units being tested or worst case, it'll have a t25 flange transplanted to the existing mani, the gtrs with it's new compact housing fitted and downpipe tweaked to suit the 5 bolt style fllange. One advantage of that will be oil and water lines will fit, as will current tip, but i'll still be mostly at the limit of it. If one of the other options comes to fruition there will be more scope for poowwaaarrrrr which will make greater use of my cams and LP head. Time will tell, i do however need something soon as the being without the car is killing us
get it on the ramp! everyone else has! :sign_omg:
on a lighter note what about a k03s? might have one on this replacement TT engine i may have bought
on a lighter note what about a k03s? might have one on this replacement TT engine i may have bought
Nope, mine stays off as much as possible to allow a ramp to be available to make money for Bill, it gets booked in for ramp time around the paying work that is booked in
It's as much work to fit a transverse turbo in a proper quattro car as fitting a BT would be, thanks for the offer tho, stuff it on the Bay
i now what you mean about ramp time. want mine done asap.
if i can help i will, whats a k03s worth? dont really want it tbh as i'll stick the k04 on off the TT as its there.
if i can help i will, whats a k03s worth? dont really want it tbh as i'll stick the k04 on off the TT as its there.
you are aware you will be putting a 19mm rodded engine in where a 20mm one once was don't you?
Possibly a few hundred depending on condition of hotside etc. On Vag talk and the likes they always sell well
Possibly a few hundred depending on condition of hotside etc. On Vag talk and the likes they always sell well
- Joined
- Sep 14, 2008
- Messages
- 24,836
- Reaction score
- 6,078
- Points
- 113
- Location
- Wibbleton
- Website
- www.tuffty.co.uk
You didn't buy a 180 motor did you Marcus?... potentially the wrong one dude as Mark says 
What engine code for the replacement motor?
<tuffty/>
What engine code for the replacement motor?
<tuffty/>
i'll get the code...what engines have the 20mm rods? what HP will the 19mm take?
not a done deal, bu available next at weekend when im back.
not a done deal, bu available next at weekend when im back.
throw an AGU lump in there and transfer all the BAM/AMK goodies over.
Or pop the head off the thing and see what's up
Or pop the head off the thing and see what's up
yup she is, currently welded solid to allow 2wd mode for roller access, need to rectumfy that once she is working as i fear worse weather up here in the middle of no mans land
Turns out my IM shaft may have been a contributor to the noise or vibration also.
Seeing as it needed to be machined to clear the rod on number 4 due to me changing to DM Rifle drilled rods to eliminate that as a source of the noise. However the brutes i removed were perfect and have since been sold on as they were perfect, but i'd never relax until i had done everything in my power to fix it.
IM shaft after machining.
Before
Plenty of clearance now.
The replacement rods have a wider radius and just touch the lower edge of the bore . Back in the day the big sellers used to sell a different rod to suit an 058 engine. Sadly this is no longer the case. Brute or Scat ore drop in, everything else needs tweakage . Given the brute have just been removed...
The start of the clearancing
I will clean it up and and dummy build the engine as soon a s the new IM shaft bearings arrive from the US
Not as bad as they could have been.
I have bowed to peer pressure and this arrived in the post today.
Seeing as it needed to be machined to clear the rod on number 4 due to me changing to DM Rifle drilled rods to eliminate that as a source of the noise. However the brutes i removed were perfect and have since been sold on as they were perfect, but i'd never relax until i had done everything in my power to fix it.
IM shaft after machining.
Before
Plenty of clearance now.
The replacement rods have a wider radius and just touch the lower edge of the bore . Back in the day the big sellers used to sell a different rod to suit an 058 engine. Sadly this is no longer the case. Brute or Scat ore drop in, everything else needs tweakage . Given the brute have just been removed...
The start of the clearancing
I will clean it up and and dummy build the engine as soon a s the new IM shaft bearings arrive from the US
Not as bad as they could have been.
I have bowed to peer pressure and this arrived in the post today.
Last edited:
TFSI Turbo on the 2.0TQS B5 !!!
Will be good to see what this makes, the F23 for the mk6 gti made around 350hp iirc !!
Will be watching this closely
Will be good to see what this makes, the F23 for the mk6 gti made around 350hp iirc !!
Will be watching this closely
Last edited:
Tbh when I say peer pressure I mean a huge change of circumstances has changed plans. Bill and Paul have gone out of their way to help me to get my car back on the road. I an deeply grateful to them and Dan at BBt for their help. Hopefully I can make some movement on it soon as space is becoming limited at the workshop .
Sulli79
Registered User
I'm not sure why but I thought you had used a 06a for your stroker (lazy skim reading prob) who have you used for your machining work?
Some progress now the block is assembled and we can see what fits and doesn't.
Dp doesn't line up
adjustment required. DP was jigged into existing position to allow for modification without the car handy
my crazy mid port ports in adapter
inlets through phenolic
Thumbs up from Bill
Bill has worked his magic
DATA DATA DATA
seemed rude not to have a look t the ports
And the rest
Bill worked his DP tweaking magic
Dp doesn't line up
adjustment required. DP was jigged into existing position to allow for modification without the car handy
my crazy mid port ports in adapter
inlets through phenolic
Thumbs up from Bill
Bill has worked his magic
DATA DATA DATA
seemed rude not to have a look t the ports
And the rest
Bill worked his DP tweaking magic
- Joined
- Sep 14, 2008
- Messages
- 24,836
- Reaction score
- 6,078
- Points
- 113
- Location
- Wibbleton
- Website
- www.tuffty.co.uk
- Joined
- Jan 30, 2008
- Messages
- 18,708
- Reaction score
- 909
- Points
- 113
- Location
- Glenrothes, Fife, Scotland
Lee Goodall
Registered User
- Joined
- Jan 30, 2008
- Messages
- 18,708
- Reaction score
- 909
- Points
- 113
- Location
- Glenrothes, Fife, Scotland
Looking awesomeI need a Bill!!
Or maybe a key for the ball and chain!
You given up on the A4? Or is it still sat on the drive?
Lee Goodall
Registered User
Ha ha.. what a welcome! I see you're still your jovial self.
The A4 is bolted back together (minus the front bumper) and was running nicely last weekend until the T.B. gave up.. luckily I have a spare to bolt on this weekend.
You done that Rover yet?
The A4 is bolted back together (minus the front bumper) and was running nicely last weekend until the T.B. gave up.. luckily I have a spare to bolt on this weekend.
You done that Rover yet?
- Joined
- Jan 30, 2008
- Messages
- 18,708
- Reaction score
- 909
- Points
- 113
- Location
- Glenrothes, Fife, Scotland
Progress at last then!
Landrover is waiting on some good weather so i can paint it!
Landrover is waiting on some good weather so i can paint it!
Lee Goodall
Registered User
Yeah, it should be back on the road very soon all being well.
I won't hijack Mark's thread so I'll PM you soon mate.
I won't hijack Mark's thread so I'll PM you soon mate.
- Joined
- May 28, 2004
- Messages
- 10,217
- Reaction score
- 2,385
- Points
- 113
- Location
- nr Glos
- Website
- www.badger5.co.uk
63mm charge pipe outlet added onto BBT supplied outlet flange
Last edited:
- Joined
- May 28, 2004
- Messages
- 10,217
- Reaction score
- 2,385
- Points
- 113
- Location
- nr Glos
- Website
- www.badger5.co.uk
beach buggy turbo 12-15psi actuator fitted. Cut off oe one and redrilled brkt to bolt this on.. plus some blue paint.. lol
- Joined
- May 28, 2004
- Messages
- 10,217
- Reaction score
- 2,385
- Points
- 113
- Location
- nr Glos
- Website
- www.badger5.co.uk
modded outlet flange with redrilled/tapped stud. final fitment now.
She is in the hole but not bolted in fully yet, just in case stuff needs to move or be unbolted.
Issue with my catching n75 valve and breaking a pip off it
Bills magic Downpipe alignment
no tension required to line this up perfectly
std water feed won't work, so needs to be swapped to a banjo
a bit too close
charge pipe needs shortening and tweaking,It catches on the chassis strengthener/Boost pipe.
It could be rotated and re welded, but it;d touch on the TFSI N75 where it's mounted on the turbo.
So It could be a slight tweak to angle, followed by a shortening of the pipe. Add a 45 degree pipe of some kind to kick it up and backwards and I believe we are in the ball park.
It is further forward than before
Tip and DV need to adjusted.
I really want to keep the airbox so think an added 45 degree on the end on the MAF to the silicone would do it
I could throw an air filter in there i guess
DV stub will be fine with the addition of some pipes to charge pipe.
Issue with my catching n75 valve and breaking a pip off it
Bills magic Downpipe alignment
no tension required to line this up perfectly
std water feed won't work, so needs to be swapped to a banjo
a bit too close
charge pipe needs shortening and tweaking,It catches on the chassis strengthener/Boost pipe.
It could be rotated and re welded, but it;d touch on the TFSI N75 where it's mounted on the turbo.
So It could be a slight tweak to angle, followed by a shortening of the pipe. Add a 45 degree pipe of some kind to kick it up and backwards and I believe we are in the ball park.
It is further forward than before
Tip and DV need to adjusted.
I really want to keep the airbox so think an added 45 degree on the end on the MAF to the silicone would do it
I could throw an air filter in there i guess
DV stub will be fine with the addition of some pipes to charge pipe.
Had this to deal with too, It was so full it was sitting above the carpet/foam.
Out with the vax
Out with the vax
That bunged grommets from the plenum chamber causing it to flood over or a leak elsewhere?
I have not got a clue what any of your pics mean, I don't know enough, but it looks ace! Bet it feels good to be getting there.
I have not got a clue what any of your pics mean, I don't know enough, but it looks ace!
Bet it feels good to be getting there.
Not scuttle drains, they are not even there any more, just gaping drain holes,LOL I need to have a look around, it does seem to be passenger rear. But i have a car full of engine bits so hard to look till i fit some,lol
So i sorted the leak, it was the ****** pollen filter housing, I dried it out and sealed the crap out of it.
I have got her running but have hit a few small snags.
One, the v band under the car leaks, probably because it was hosing down when i did it.
two, I chose to set the cam pulley a little bit retarded to see if it made a difference on the previous correction values, I think the 4 degrees I have altered it has just nipped it into correlation error mode, so I need to re set that.
And this hose gave up, and split.
I priced it up thinking it'd be a few quid, but now TPS want 60 quid for it. So for now it has been repaired to get the car working.
It seems Audi got around this issue by switching the hoses around on the turbo so the one furthest away from the engine fits to the block, this eliminates the tight turn
I have located a Rocker cover to get painted/coated, just need an Inlet manifold unledd i use the small port one for now on mine and get mine coated. A few members on here have offered me one to use to get coated so nay take them up on that.
Next step is to fit the bixenon projectors I got of egay and see if it improves the headlights as they are dangerous at speed even on HIDS
I have got her running but have hit a few small snags.
One, the v band under the car leaks, probably because it was hosing down when i did it.
two, I chose to set the cam pulley a little bit retarded to see if it made a difference on the previous correction values, I think the 4 degrees I have altered it has just nipped it into correlation error mode, so I need to re set that.
And this hose gave up, and split.
I priced it up thinking it'd be a few quid, but now TPS want 60 quid for it. So for now it has been repaired to get the car working.
It seems Audi got around this issue by switching the hoses around on the turbo so the one furthest away from the engine fits to the block, this eliminates the tight turn
I have located a Rocker cover to get painted/coated, just need an Inlet manifold unledd i use the small port one for now on mine and get mine coated. A few members on here have offered me one to use to get coated so nay take them up on that.
Next step is to fit the bixenon projectors I got of egay and see if it improves the headlights as they are dangerous at speed even on HIDS
