My latest mod.

jojo

Looking for Boost!
Staff member
Moderator
Joined
Sep 4, 2003
Messages
29,115
Reaction score
3,862
Points
113
Location
Solihull, Midlands
Website
www.audi-sport.net
Just came through the post! :)

D5ABFB84-C5A5-4CDC-8861-BDD8C8B6E527-13443-000009712D20F2E0_zps04fd6f8b.jpg


Not got time to fit it today, and I'm going on a trip tomorrow, so you'll have to wait for the 'fitted' pics.
 
You're fitting a pool table in your S3!?

Pretty cool :) lol
 
  • Like
Reactions: S3quatt
Will it actually be fitted this year....unlike the tie arms that I remember you purchased and didn't fit for ages? Lol

(don't know how you do it, have mods sitting there and not put on!)
 
Will it actually be fitted this year....unlike the tie arms that I remember you purchased and didn't fit for ages? Lol

(don't know how you do it, have mods sitting there and not put on!)

They will be fitted for GTI Inters for sure, it would be tricky to drive without it fitted.
 
Ok then have you photoshopped a massive box containing a geezer on a lambretta with Ox blood dm's and a target on his back , to make it seem as though its quite small and sitting on a pool table ?
;)
 
I'd be happy with just the box. Its an awesome looking box, my advice is not to open it in case you end up dissapointed :)
 
Is it a Revo remap so you can race me ?
 
Is it a Revo remap so you can race me ?

It will probably give me 0.1 secs on the strip!

blur or competition haldex

I have a Haldex Performance Controller in a bag somewhere waiting to be fitted! Doubt I will get it on before GTI Inters though, it's quite tricky to fit.
 
  • Like
Reactions: Sandra
I have a Haldex Performance Controller in a bag somewhere waiting to be fitted! Doubt I will get it on before GTI Inters though, it's quite tricky to fit.

Nah it's easy. A bit of string for pulling the cable through and then there's a "nack" to sliding the controller in and out. Generally pretty easy and easily done within an hour including a haldex service while you're there!
 
Nah it's easy. A bit of string for pulling the cable through and then there's a "nack" to sliding the controller in and out. Generally pretty easy and easily done within an hour including a haldex service while you're there!

It's easy if you have a ramp, trick on axle stands on your drive! Lol
 
It's easy if you have a ramp, trick on axle stands on your drive! Lol

That's exactly how I did it (twice, had to replace the gasket). Forgot to mention in the previous post but you also need an elastic band to hold the gasket to the controller. Chop it off once you get the bolts in a couple of turns.

Fair play though. If you're anything like me, I just can't be ***** to do some jobs on the car these days.
 

Similar threads

Replies
11
Views
1K
Aky
Replies
40
Views
3K