A3 to S3 Conversion Interior / Exterior w/ Recaro Seats

audi_s5

Registered User
Joined
Jan 4, 2013
Messages
13
Reaction score
1
Points
3
Location
United States
While S5 is stored - thought I would share winter project with my DD (since new A3/S3 will not hit US until mid or late 2014)

Step 1 - Interior/S3 Front with Recaro Seats , complete quattro GmbH leather trim, S3 steering wheel


A3 to S3 Body / EUR Interior Conversion - Almost Complete with professional photos soon. Final pieces (much more [wrench]) set for install soon w/ current setup being Stage II+.

A big thanks to Nick @ OEMPlus, Christian @ BKS Tuning, and Joe Hengel and service team at Bergstrom Audi of Appleton.

You will notice full OEM install with OCS sensor in passenger seat, along with factory climate control with heated seats added as OEM with Kufatec harness and proper climate control unit

p2100252.jpg


p2100258.jpg


p2100261.jpg


p2100282.jpg


p2100276.jpg


p2100281.jpg


p2100286.jpg


p2100269.jpg


p2100265.jpg


p2100266.jpg


p2100270.jpg


p2100294.jpg


p2100283.jpg


p2100273.jpg


p2100278.jpg


s3pedalset.jpg


Step 2 - w/ Exterior


S3 Front/Rear Bumper, S3 Side Skirts, S3 Door Moldings, S3 Door Sills, & RS3 Spoiler, S3 Mirrors

Many more to come once weather turns in the next couple weeks and S5 comes out of heated storage. (Please excuse the winter rims & suspension settings - S3 split spoke wheels and tires w/ new Michelin Super Sports ready to be mounted once snow melts.)

Bergstrom Audi Auto Body refinishing bottom portion of rear spoiler with Alum Matte treatment next week and all paint work will be done. (was missed but is being corrected)

All the body work and paint by Bergstrom Audi turned out flawless.

S3 Front Brake Conversion - In process

img0540p.jpg


img0542su.jpg


img0529hy.jpg


img0533y.jpg


img0536nu.jpg


img0544dbj.jpg


img0531qd.jpg


img0535cb.jpg


img0547re.jpg


img0539iu.jpg



Step 3 - Alum Matte applied to RS3 spoiler


I apologize for rushed / poor quality iphone pics -- more to come

photo15ig.jpg


photo14tc.jpg


photo26cx.jpg


photo24ct.jpg


K04 & KW V2 setup in process
 
Last edited:
  • Like
Reactions: a6_chris
I want those seats :(

Where did you get the alluminium matte vinyl from?
 
Thank you for feedback - much better detailing once weather gets warmer

Zaino product line

ahh expensive stuff, it is good though have you tried the gtechniq line yet?

did you buy your grab handles and door grabs or did you get them trimmed?
 
Very nice work there mate! love the Recaros :wub:

are you going to leave the S3 badges on the car? not a fan of mis-badging it.
i really need to get used to those RS3 spoilers... still looks weird to me
 
ahh expensive stuff, it is good though have you tried the gtechniq line

did you buy your grab handles and door grabs or did you get them trimmed?

Have not tried gtechniq - but may look into it

Leather wrapped trim is OEM purchased from BKS Tuning
 
Very nice work there mate! love the Recaros :wub:

are you going to leave the S3 badges on the car? not a fan of mis-badging it.
i really need to get used to those RS3 spoilers... still looks weird to me

Ash - thank you for compliments

not sure on badges and would normally agree with you, but given S3 not available for purchase in US and with K04 setup my car will have more power than factory S3

in addition other badges are on all door sills, steering wheel, shifter, etc
 
Last edited:
Very nice :o.k:

Whats the two buttons for in the front of the drivers door card pocket (pic 12)?
 
release for fuel cap and rear hatch release/open

Ah ok, thanks!


Obviously I don't have them! But they unlock when either the key is removed or the 'open' button by the interior door handle. Not sure why the extra buttons would be needed, but I like buttons!
 
Lovely upgrades on the interior, just forgot to upgrade to a newer gearknob!

About that, I saw a few knobs on ebay.de (round, with the button in front not on the side) and I wanted to buy one. The seller warned though that they won't fit to cars with that button on the side.
Any idea why or how to make it work?

@audi_s5: can you put a closeup picture with the exhaust tips? They look interesting.
 
About that, I saw a few knobs on ebay.de (round, with the button in front not on the side) and I wanted to buy one. The seller warned though that they won't fit to cars with that button on the side.
Any idea why or how to make it work?

@audi_s5: can you put a closeup picture with the exhaust tips? They look interesting.

Car has STaSIS exhaust system w/ AWE downpipe with metal cat converter (online pic of tips below)

stasis_SE531-E10-01-00.jpg
 
Last edited:

Similar threads