Hi chaps, over the weekend I switched out the single din stereo cage in my 07 Sportback for a double din item. The conversion itself was successful, but on Monday morning on the way to work I noticed the centre dash vents were not blowing air.
The procedure requires you to delicately shoe horn the cage in position and bolt it behind the dash. I was wondering if there were any mechanical flaps or linkages that I could have disturbed.
Also the HVAC unit was changed for the double din version, this unit was tested briefly before hand and functioned as it should, I must say Iâm not 100% sure I checked to see if all vents were circulating air or not in operation.
Could anyone give me some pointers where to start as Iâm not at all familiar with the ventilation arrangement of this car.
Appreciate any assistance on this one.
Cheers
The procedure requires you to delicately shoe horn the cage in position and bolt it behind the dash. I was wondering if there were any mechanical flaps or linkages that I could have disturbed.
Also the HVAC unit was changed for the double din version, this unit was tested briefly before hand and functioned as it should, I must say Iâm not 100% sure I checked to see if all vents were circulating air or not in operation.
Could anyone give me some pointers where to start as Iâm not at all familiar with the ventilation arrangement of this car.
Appreciate any assistance on this one.
Cheers