19*9 - ET33 - Front & Rear = 30 Pics.. Pretty nice :)

KemiksiZ

KemiksiZ

Registered User
Joined
Mar 2, 2006
Messages
557
Reaction score
142
Points
43
Location
TURKEY
It does not rub almost at all in the front.. We pulled hard the front fenders, removed the screws.. So nothing wrong right now.. I have 1 finger gap by the way with the sport springs..


Rears rub a little, 225-35-19 BOTH.. It rubs a little with -2 camber but nothing major..

PS The little sweet ******* is my brother :)

Here r the pics:



What do you think about RS3 bumper + Quad exhaust? :)


























































 
Last edited:
  • Like
Reactions: Ironborn
Very nice.

What did you use to get front camber?
 
Thnks mate :)

No front camber, its not adjustable..

We just pulled hard the front arches by bare hands..

And removed screws..

Nothing more.. Our fronts are not that narrow! :)
 
kemiksiz said:
Thnks mate :)

No front camber, its not adjustable..

We just pulled hard the front arches by bare hands..

And removed screws..

Nothing more.. Our fronts are not that narrow! :)
Click to expand...

Thats why I asked.....I've gone over to adjustable topmounts and a few other things to gain some front camber and more adjustable suspension.
 
Looks nice! i like the quad exhaust but would have preferred twin ovals. One thing doesnt look right....

You have gone through all that hassle and money yet you still have the ugly sport style rear bumper that doesn't have that flick out at the bottom like a proper s3/rs3 bumper does so it ruins the lines for the skirts


2011-audi-RS3-rear-view.jpg


See how yours curves in on the sides showing much more tyre and generally looking ugly

rs3quadbenim.jpg
 
Last edited:
Thanks guys :)

Ash, You are completely right :)

This time, I'm going to buy the lower curved part of the s3 - rs3 bumper.. It wont be so round like my current one.. So it will flow with the skirts.. And maybe you may notice; there is a bigger GAP on rs3 valance-diffuser for the exhausts on the left, and there is not same amount of gap on the right side.. So it will cause a liitle work in order to make a proper quad conversion.. But you know, I can make it done :D
 
kemiksiz said:
Thanks guys :)

Ash, You are completely right :)

This time, I'm going to buy the lower curved part of the s3 - rs3 bumper.. It wont be so round like my current one.. So it will flow with the skirts.. And maybe you may notice; there is a bigger GAP on rs3 valance-diffuser for the exhausts on the left, and there is not same amount of gap on the right side.. So it will cause a liitle work in order to make a proper quad conversion.. But you know, I can make it done :D
Click to expand...

the problem you will have is that you have the one piece bumper and the S3/RS3 ones are 2 piece where the bottom piece flicks out so you will need to replace your whole rear bumper. best off getting an S-line upper bumper with parking sensor holes and then fitting the original RS3 lower part along with your diffuser.
your front arches look nice and wide :wub:
 
Yap, exactly Ash.. I'll do that.. I'll sell this as one piece :) Or will save it for SELLING the Car time..

Actually the ET and wide rims make the trick for the front arches. Nothing majot DONE for them, almost nothing.. When you are brave enough to fit that wide and low et rims into your front arches, God helps a lot! :D
 
I like what you've done with the valance it looks very different, nice touch ;) But the car would look even better with wheels that actually fit and less of a tractor stance ;)
 
Shouldn't et 33 be poking more than that?!
 
N8 said:
I like what you've done with the valance it looks very different, nice touch ;) But the car would look even better with wheels that actually fit and less of a tractor stance ;)
Click to expand...

Thanks Nigel :)


If it was a SEDAN or an a4 avant, it would be superb but since we have a very short rear bumperextension, i guess you are a little right, BUT NOT ALL RIGHT :p

In person its not eye scratching, actually seems pretty aggressive :)
 
hahah he has done already..

He is my little brother, I'm not the one in the pics.. :)
 
Last edited:
What's it like with 3 adults in the back when you go over a speed bump?:w00t:
 
3 adult in the back? U r pushing too hard man! :p :D

2 adults and it rubs when it bounces.. 2 person in the front, it rubs on speedy bumps anyway.. But there is nothing much left to rub inside my arches, its al shaved and melted :D
 
One thing I've notice thou. You have no side indicators.
 
Yap, waiting for a bargain.. I have caps but no mirrors yet :(
 
Stick out too much for my liking.

Good effort tho
 
kemiksiz said:
Yap, waiting for a bargain.. I have caps but no mirrors yet :(
Click to expand...

You know I still have the bases buddy...

They aren't going for as little as your willing to pay though mate...PM me.
 
Is it me or is that bumper pic with the rs3 diffuser a photoshop?

Im currently havin one put on the rear of mine but with a hidden exhaust.
 
Biggy,

Its a pure Photoshop mate :)

Just before I give a birth to it in real :)
 
You must log in or register to reply here.

Similar threads

KemiksiZ
  • Start Poll
PICS inside: 255/30/19 - et45 - 9.5 wide => No rub with -2 camber
Replies
1
Views
1K
monopole
M
Lewbo
a3 19", 9J, ET33 from a5
Replies
8
Views
5K
N8
N8
KemiksiZ
Rs3 Transformation: DONE w/wide rear arches (275-30-19, et 38, 19*9,5 all)
Replies
0
Views
1K
KemiksiZ
KemiksiZ
KemiksiZ
Just Tried & Shoted Pics: 275 - 30 - 19 with et 40 on a 9.5 rims on A3 Sportback!..:)
Replies
6
Views
2K
dakmaster
dakmaster
KemiksiZ
Widebody Rs3 Conversion, Sepang, 275-30-19
Replies
8
Views
3K
Omy193
Omy193
Top
Back