I would pop round for a full scan now mate if you we're round here I have a cheap eBay scanner but they don't go deep enough eh it picked up the over boost codes when my turbo Gaines were sticking tho so not a total waste of cash eh
I would pop round for a full scan now mate if you we're round here I have a cheap eBay scanner but they don't go deep enough eh it picked up the over boost codes when my turbo Gaines were sticking tho so not a total waste of cash eh
Ordered £24 delivered for the pairGuys - have a look at these. Not sure if they are correct for your applications but very similar and I think match the part no.s on page 1.
Spray Jet Caddy EOS Golf Jetta Passat Scirocco Tiguan Touran Touareg 5M0955986C | eBay
Oh...and these look like the heated version too.
Ordered £24 delivered for the pair
Ordered £24 delivered for the pair
I reckon so having looked at the inside of them, mine are here but sod going out there to do 'em while it's this cold....they need ajustng tho as they are spraying a bit high do you undo the little Allen bolt to adjust them?
got mine today but too to go out fitting. lolGot mine & fitted them today
No need to extend anything on mine as they were a straight swap, & they seat properly too
Not overly impressed with the spray pattern, but I think a little more fine tuning is required.
they must have been a bit more generouse with the wires on the facelift mate ehGot mine & fitted them today
No need to extend anything on mine as they were a straight swap, & they seat properly too
Not overly impressed with the spray pattern, but I think a little more fine tuning is required.
He's obviously a middle man, plenty of those on Ebay. He's probably getting them for wayNot that I'm complaining, but bit confused when his eBay location says Halifax and the items were posted from Poland
they must have been a bit more generouse with the wires on the facelift mate eh
Are yours heated then Ryan?, and your wires just fitted or did you just connect the nozzles?Got mine & fitted them today
No need to extend anything on mine as they were a straight swap, & they seat properly too
Not overly impressed with the spray pattern, but I think a little more fine tuning is required.
Are yours heated then Ryan?, and your wires just fitted or did you just connect the nozzles?
re the spray pattern\angle: is that an allen key grub screw I see beside the nozzle & is it for adjustment of said pattern or just the angle?
Thanks
Mine is a 56 plate s line matethey must have been a bit more generouse with the wires on the facelift mate eh
Yay!! Mine is 09reg too, I may go out and do them today. How long did it take and what tools were required? Any tips to ease the fitting process?Did mine yesterday afternoon, but didn't have the time to adjust them as I had to go out, but I didn't need to make any mods to either connector wiring & they're a good, tight fit... MY09
I used a palette knife to lift an edge, then they just plucked out.Yay!! Mine is 09reg too, I may go out and do them today. How long did it take and what tools were required? Any tips to ease the fitting process?
I wondered about that... When I installed mine they fit perfectly, cable didn't require extending, and when I test squirted them they didn't seem to need adjusting (I was expecting to have to - even had tools at the ready).
The spray, unadjusted, reached the top of the windscreen and seemed to cover it all so didn't bother adjusting it as it already seemed okay. Did yours have similar coverage when you first installed them? Tempted to adjust them anyway and see if it helps.