Touching with 19 inch wheels

zaeem

Registered User
Joined
Aug 2, 2009
Messages
104
Reaction score
77
Points
28
Location
NULL
Hi guys i just fitted rs6 reps et45 tire size is 235/35/19. My car is touching when i drive over bumps. Any remedies for this ?
 
8,5 j et 45
Someone mentioned to me about a screw that must be removed does anyone have a pic of this screw
 
Are you touching in the front or the back? You can't miss the screw you need to remove, it's right on the edge of the wheel arch and looks far more raised than the rest.
 
Are you touching in the front or the back? You can't miss the screw you need to remove, it's right on the edge of the wheel arch and looks far more raised than the rest.

I removed a screw at the weekend, but it was in the middle at the top of the arch. Is this the right one?
 
As N8 says, with that size and offset, you are going to struggle not to rub with 235's...you need to run 225's and then you won't have any issues, and they aren't much of a stretch...loads of the guys on here run them with no issues.
 
I got a 225 on a 9.5 inch rim on the back, so I'm sure you'll be fine on a 8.5 inch rim dude
 
I had 225/35 on 8.5 ET44 at the front, ET48 at the rear with no rubbing. You don't get any side-wall protection, so wheels kerb easily, but no rubbing.