Hey guys,
I know this topic has been done a couple of times on the forum but want to add my thoughts and see what people think....
So - we all know its possible to "activate" the TPMS on the A3 on 2010+ cars with or without the need for a reset button.
I have activated the TPMS and it's possible to reset the value using VAG. Can be a pain in the butt if you have to do it a few times. It works fine but with no DIS control or error messages.
On the new A3s, the TPMS does not have a button but is rather controlled through the DIS which I have been stuggling to sort, until now...
Started off by reading this thread - stemei.de .website von Stefan Meier .VCDS codierung .webdesign .IT solutions - RDK freischalten
----
First and foremost I have the MK60 ABS module.
Started off by doing the below:
1.
17 - Instruments
- Security Access
-- 13861
---
2.
17 - Instruments
- Coding
-- Added +16 to the first 4 digits. Changed it from 2060408 to 2076408
--- Do It!
At this point I did get a TPMS warning on the dials (See Image below)
---
3.
17 - Instruments
- Adaption
-- Channel 037 -> Read
--- Test
----Save
(Its worth noting that the above 2 steps activate TPMS in the DIS)
---
4.
03 - ABS / Brakes
- Coding
-- Long Coding Helper
--- Byte 16
---- Tick Bit 2
---
5.
19 - Can Gatewat
- Installation List
-- Tick 4C Tyre Pressure II
--- Save
---
Once all was done, turned the car off for a moment and then restarted...
After startup I was greeted with this message:
---
Just so you can see the DIS control:
---
Does anybody have any ideas on what the next step could be or what needs to be done to ensure no error messages and to make the DIS work?
As this was a kind of trial and error experiment, I wanted to see if it was possible and may have well made 1 or 2 mistakes.
Cheers y'alllllllll
I know this topic has been done a couple of times on the forum but want to add my thoughts and see what people think....
So - we all know its possible to "activate" the TPMS on the A3 on 2010+ cars with or without the need for a reset button.
I have activated the TPMS and it's possible to reset the value using VAG. Can be a pain in the butt if you have to do it a few times. It works fine but with no DIS control or error messages.
On the new A3s, the TPMS does not have a button but is rather controlled through the DIS which I have been stuggling to sort, until now...
Started off by reading this thread - stemei.de .website von Stefan Meier .VCDS codierung .webdesign .IT solutions - RDK freischalten
----
First and foremost I have the MK60 ABS module.
Started off by doing the below:
1.
17 - Instruments
- Security Access
-- 13861
---
2.
17 - Instruments
- Coding
-- Added +16 to the first 4 digits. Changed it from 2060408 to 2076408
--- Do It!
At this point I did get a TPMS warning on the dials (See Image below)
---
3.
17 - Instruments
- Adaption
-- Channel 037 -> Read
--- Test
----Save
(Its worth noting that the above 2 steps activate TPMS in the DIS)
---
4.
03 - ABS / Brakes
- Coding
-- Long Coding Helper
--- Byte 16
---- Tick Bit 2
---
5.
19 - Can Gatewat
- Installation List
-- Tick 4C Tyre Pressure II
--- Save
---
Once all was done, turned the car off for a moment and then restarted...
After startup I was greeted with this message:
---
Just so you can see the DIS control:
---
Does anybody have any ideas on what the next step could be or what needs to be done to ensure no error messages and to make the DIS work?
As this was a kind of trial and error experiment, I wanted to see if it was possible and may have well made 1 or 2 mistakes.
Cheers y'alllllllll
Last edited by a moderator: