RNS-E + Factory AUX Port (No BOSE)

[1PRH]

Hi - First post, sorry if it is in the wrong place..! I have a 2009 Audi A3 with the factory fitted AUX port - No BOSE. I have an RNSE with chrome buttons to fit but am not sure how I would go around integrating the existing AUX port into it. Does the AUX port have to be configured via VAG-COM and/or any other implementations behind the dash required to ensure that it works? The current head unit is an Audi Chorus.

Thanks

 

[rOb_A]

yep you'll need to get hold of the 32 pin AMP connector (PN: A1J0 972 977 G) from Audi. cost £4.00 plus you'll need to get the RNSE coded in. bit of cable moving. just done this myself with help of others on here

 

[Dannykn9]

Here's a how to guide mate, but this is if you start from scratch. Should be pretty easy to follow from half way through.

rnseauxin - Audi Retrofit

 

[downtothebone]

Here's a how to guide mate, but this is if you start from scratch. Should be pretty easy to follow from half way through.

rnseauxin - Audi Retrofit

Guide mentions "The first step is to enable Aux-In via VAGCOM - assuming you already have SW0650 installed."

How do I check this with VCDS?

Thx.