S3 injectors

[chrisa4quat]

Where can I get hold of some? Are these the best for the 2.0t upgrade?

 

[ANDYTQ]

Ebay cheapest i have seen sets for 150-300 ,its a shame i didnt buy the ones for 150,i need a set now for ko4 conversion.

 

[deian3387]

Just bought a set off ebay for £98... Bargain!

 

[chrisa4quat]

How do I search? What s3 are they from?

 

[deian3387]

This is the part number you need

06F 906 036 F

you can search ebay and google using that number.. i think you can get them cheaper off ebay.de

 

[chrisa4quat]

This is the part number you need

06F 906 036 F

you can search ebay and google using that number.. i think you can get them cheaper off ebay.de

Thanks .

I'm guessing another remap will be in order after fitting?

 

[ANDYTQ]

They need to be the ones off the 2.0tsfi s3 not the early ones!

 

[ANDYTQ]

Yep correct no.

 

[ANDYTQ]

Yes a remap will be required after ko4 and injector fitment.

 

[Marrow]

So no point fitting them without ko4 ?

 

[ANDYTQ]

You only need them with a ko4,otherwise just get a uprated fuel pump for st 2+.

 

[chrisa4quat]

What if I fitted just Injectors no ko4?
Looking for 300bhp ish. Already have hpfp & decat

 

[Marrow]

No gains by sounds of it mate !?! Waste of time snd money unless you get ko4

 

[ANDYTQ]

No point putting more fuel in if your not pumping extra air as well,otherwise it would just be mega rich.

 

[ANDYTQ]

Just bought a set off ebay for £98... Bargain!

Are you going ko4 then or ko4 hybrid?

 

[chrisa4quat]

Ko4 from 1.8t???

 

[S3AMK20VT]

some here OEM Audi S3 2.0TFSI Injector 06F906036F - FR&R Tuning| MAHA Dyno Rolling Road Tuning| Stage 1, 2 & 3 Engine Performance Upgrades - (Powered by CubeCart)

 

[ANDYTQ]

Ko4 from 1.8t???

No ko4 from 2.0t s3,tts,golf edition 30,leon cupra.

 

[solaris]

Ko4 from 1.8t???

The K03 unit on the TFSi will out flow the k04 used on the early 1.8t.
The flow rate of the current injectors are good enough for 300bhp if your going k04 then you'll need the S3 injectors, if your going for a bigger frame turbo then use RS4 injectors.

 

[chrisa4quat]

I am after about 300 for now. Need to et a dyno. So far de cat, induction kit, hpfp internals, exhaust and a map. Just feels slow still. Friends say it aint but to me it is

 

[Marrow]

Sounda like your just used to the power mate ! With your current mods you should be around 280ish so i very much doubt iys slow lol

 

[spider74]

Id reccomend the K04 upgrade, just do the Injectors and get a stock decent K04 from a 2.0tfsi TTS or S3. You only really need one custom pipe to make it work and mine mapped to just under 340ps and 470nm. Check out Solaris and his K04 Hybrid thread on both his and my builds. If you shop around you can get a K04 for about £600?