Slight increase in revs when changing gear. Clutch pedal sensor?

[jackpilk]

I've been getting a slight increase in revs when changing gear, say about 500-700 rpm max, usually happens when changing gear on boost.

Is this 'normal'? , is the clutch sensor known for causing this?

The car's had it's clutch replaced in 2009 by Audi and has done 25k miles since.

Car is 225 S3 and hasn't been mapped.

 

[Chlippo]

I had this problem a couple of years ago, the clutch pedal sensor was faulty. replaced it and solved the problem.

 

[G60DAN]

Same here a new clutch pedal sensor sorted it I think it was like £14 from Audi.

 

[deeman88]

I had this problem a couple of years ago, the clutch pedal sensor was faulty. replaced it and solved the problem.

thanks for that, mines does it randomly. will give this a go

 

[jackpilk]

Cheers guy's! Think Audi are getting sick of me the amount of times I'm in there

 

[vfr800]

thanks for that, mines does it randomly. will give this a go

Mine does that too, today I found the plastic stop was missing, little piece of plastic that the clutch switch presses against. Once I'd fitted that VCDS told me the switch was fubar.

Look to see what the switch is pressing against.

TPS have a new switch on order for me for about £10 + VAT.

Liam

 

[slowcoach3]

Im sure every s3 in Devon has issues at the moment Jack! Exeter Audi have been nice recently though, very out of character...

 

[deeman88]

Mine does that too, today I found the plastic stop was missing, little piece of plastic that the clutch switch presses against. Once I'd fitted that VCDS told me the switch was fubar.

Look to see what the switch is pressing against.

TPS have a new switch on order for me for about £10 + VAT.

Liam

lol, i had almost forgotten about vcds you know. will scan in the morning

 

[deeman88]

Im sure every s3 in Devon has issues at the moment Jack! Exeter Audi have been nice recently though, very out of character...

maybe they are campaigning for higher customer satisfaction feedback numbers or something lol

 

[s33nyboy12]

...

Mine does that too, today I found the plastic stop was missing, little piece of plastic that the clutch switch presses against. Once I'd fitted that VCDS told me the switch was fubar.

Look to see what the switch is pressing against.

TPS have a new switch on order for me for about £10 + VAT.

Does anyone know part number for plastic bit???

Or bump bump, can car run without sensor???

Just got back and it really is annoying. Looks and sounds like I'm granny shifting!

Liam

 

[s33nyboy12]

The bottom 3 lines of above post are from me,, damn iPad !

 

[vfr800]

The bottom 3 lines of above post are from me,, damn iPad !

1J2 721 332 A

In place

 

[s33nyboy12]

Mate, really appreciate that. Pictures are a massive help!

Cheers, Sean