Well decided I might be going BT

hopefully it is pal if there not l.... as at first it came with standered actuater and not the uprated one they said he
 
whats different bill and is there owt i can get changed wile its off
 
Prawns has a clipped turbine as does the hybrid on Bill's Lupo... yours is unclipped I would imagine based on the spec you posted..

<tuffty/>
 
thanks tuffty does that stop surge or produce more power if so might have to send cr it back and get them to clip it and im shore it has it done already buy the look of it
 
thanks tuffty does that stop surge or produce more power if so might have to send cr it back and get them to clip it and im shore it has it done already buy the look of it

Yours is clipped according to the pictures you posted in your thread here...
http://www.audi-sport.net/vb/a3-s3-...-iv-done-my-s3-other-last-year-half-pics.html

IMG_0460.jpg


Did you get the EGT probe boss sorted as yours was blocked off last time I looked... yours is an AMK so will have an EGT probe...
IMG_0469.jpg


<tuffty/>
 
im also looking at a gt2871 in the near future. i will be doing the hybrid k04 first just as a trail for relentless.
watching this thread closely :)
 
just had a though, please shoot me if im talk bull :) if you are like me with all stage 2 mods and relentless manifold. why not make your own eliminator kit. weld a t28 flange onto the relentless manifold replacing the k04 flange. then buy one of these

weld onto the 3" dp. this may not work or fit but if it does work it will save a few pennies im sure :)
 
thanks tuffty ye the egt is sorted now sent them it back and they drilled it out so with mine been clips does that meen its same as prawns tuffty cheers.

ans sam good thinking dont now owt to do with turbos and welding so be a pig for me but is a good idear if ya think about it money wize ill be in contact soon too about the mani as i start my build in few week