What size wheels will fit.....

[Mackers]

what size wheels and tyres will fit my "X"Reg 2.5Tdi Quatt....
as i have been offered some (i dunno what type of size) for a SILLY Price
i was therefore wondering can you pls help and post the tyre size combo's that fit.
Thanks
Wayne.

 

[Oranoco]

First point you must makes sure they are five stud and have a PCD of 112mm, from there you want an offset around the ET35-40 mark and rim width of 7-8J. Tyres depend on the size of the rims but on an 18" rim I use 225/40/18 and on my old 17's I used a 225/45/17 (iirc)

 

[Mackers]

they are deffo 5x112 (they off a mk4 golf with a 20vT engine) but what if they the 19's :S, i hope they are 18, as i had 18's on my leon and loved them

 

[Oranoco]

Pretty sure Mk4 Golf is 5x 100mm PCD

 

[ScottD3]

I just bolted on a set of Avus IIIs (18x8? ET?) with 235/40/18 tyres and they appeared to fit with no issues on a 40mm drop.

I should be fitting a set of 18x8.5J ET25 with 225/40/18s (I think. I'm awful at remembering them numbers) and they should be fine.

You need to find the size,width and ET and it will be allot easier for us.
Also if they come with tyres. what size?

 

[ScottD3]

Pretty sure Mk4 Golf is 5x 100mm PCD

They are.

 

[aragorn]

Scott: Avus3's are 18x8 ET45. I dont think you'll get 8.5" wide ET25 rims on a B5 without some serious arch hacking...

 

[Mackers]

i jus realised that too, :S hmmm, the lad recons it'll fit, but i think he had hub-centric adaptors on his golf... so maybe, i'll try fitting one to see

 

[Mackers]

Scott: Avus3's are 18x8 ET45. I dont think you'll get 8.5" wide ET25 rims on a B5 without some serious arch hacking...

arch rolling etc. ain't no problem, i have a mate with a bodyshop and hes well into modding too

 

[ScottD3]

Scott: Avus3's are 18x8 ET45. I dont think you'll get 8.5" wide ET25 rims on a B5 without some serious arch hacking...

35 then.............I can't remember.
I'm crap with ET numbers. lol

 

[Mackers]

right... Got most things confirmed today. They are genuine bentley 19" wheels with tyres for a stupid price. They where fitted to a mk5 golf. I know i'd need adaptors to swap the pcd.... Any idea on prices and where to get them from.. Thanks wayne

 

[Broken Byzan]

Bentley rims are 5x!12 iirc

 

[Arrkon]

Yep. Bentleys are 5x112... So the golf was a mk5 or pcd adapters were used. They should fit straight onto a b5

 

[Oranoco]

Sounds good, get them on and some pics up

 

[rezulteo]

For the Audi A4 Quattro 2.2 TDi 150 (Since 1994), these are the tyre sizes that officially fit your vehicle :

• 225 45 R17 91 Y
• 205 55 R16 91 W
• 205 60 R15 91 V
• 195 65 R15 91 V

I hope this helps you out!

 

[Foxmeister]

Interested in what these wheels are and price if you dont mind sharing? Pics?

P.s i dont want them by the way, just a nosey fecker really!!!

If they are really cheap, buy them then punt them on, plenty boys looking for Bentleys!

 

[Mackers]

it fell through they was off a Bentley continental 2008 (the 5spoke type)
he sold them with the 20vTurb golf for £2500 THE DAY BEFORE I WAS DUE TO UY

Redirect Notice

 

[slepy]

You can buy these wheels for £700-800 quid easily. Just need to wait.
Here are ones for a grand Bentley Continental GT Wheels 19" (Audi, VW, Alloys) | eBay

 

[audi-a6]

if im not mistaken, 5x100 does fit 5x112, i only know this as thats what i got on my a6, wheels are 5x100, 8.5j et25 (yes the do stick out, but looks really good) the only difference is the spigot on the hubs are to small for the rims, i had to get some 72.6mm spigots as audi hubs were 57.1mm

 

[Foxmeister]

Mackers - If he offered them to you at £1200 i wouldnt consider them a bargain mate, not much lost there then.

audi-a6 - 5x100 does not fit 5x112, they are 2 different PCD's(Pitch Centre Diameter) meaning the bolt holes are spaced each at 100 or 112mm from the centre of the hub. The wheels that fitted yours may have been multifit with 10 bolt holes(5x100 and 5x112) and that is how they did fit, they cover 2 PCD's!

 

[audi-a6]

There definatly 5 stud (not multifit) the weird thing is that my little tool that measures pcd says 5x100 and when I bought the wheels they came directly off a BMW......... So now I'm confused lol may start up a new topic....

 

[Foxmeister]

There definatly 5 stud (not multifit)

Multi fit can have 2 x sets of 5 stud applications, its actually quite common for 5x100 and 5x112 on the same wheel!

Strange when you say they came off a BMW, they are 5x120 normally, so nothing seems to add up here! What were the wheels, any pics? What car did you have them fitted to???

 

[audi-a6]

i have them fitted to my audi a6 at the mo, not a very good pic, but here you are....

 

[Foxmeister]

Are you using adapters to fit them maybe?

 

[audi-a6]

Are you using adapters to fit them maybe?

nope, only spigot rings.......... maybe the bmw had adapters?

 

[Mackers]

Mackers - If he offered them to you at £1200 i wouldnt consider them a bargain mate, not much lost there then.

audi-a6 - 5x100 does not fit 5x112, they are 2 different PCD's(Pitch Centre Diameter) meaning the bolt holes are spaced each at 100 or 112mm from the centre of the hub. The wheels that fitted yours may have been multifit with 10 bolt holes(5x100 and 5x112) and that is how they did fit, they cover 2 PCD's!

i kniw specially when i was offerd 4 WITH tyres for £350, i'm so so gutted, lol

 

[Foxmeister]

nope, only spigot rings.......... maybe the bmw had adapters?

Good point, and most logical then!