BI XENON OR ADAPTIVE

[niallraff]

Hey guys can anybody tell me from the picture if these lights are bi xenon or bi xenon adaptive , they have a 11 pins in the connector .
Thanks

 

[micasb]

bi xenon adaptive

 

[Lewbo]

How can you tell from this picture thats these are adaptive, has I have 11 pins on my connector but mine are just bi-xenons not adaptive which I know as i facelifted but my 8p2 bi-xenons wasnt adaptive, but Would mine support adaptive with 11 pins? This is all I want to know? Tha ks

 

[micasb]

Because of that small stepper motor you see on the pic...
That one is for lateral movement of the xenon lens. To the vertical you can't see from that pic.

 

[niallraff]

Thank Micasb .
So i will need the afs module loom and level sensors to get these lights working properly, and headlight washers ?
I already have the 10 to 14 pin loom from kuaftec

 

[micasb]

Yes, plus your CE module must be Highline version (K, N or P revision would be great).
Wiring and the coding.

 

[niallraff]

Yea its k
As for the level sensors would you have a part no. for the rear sensor or even a picture, im goin to try to get them of ebay ?
Thanks again.

 

[micasb]

I'll get the PN from my ETKA and get back here to tell you...

Cheers.

 

[nally]

what do they look like at the front?

 

[micasb]

Let me see if i can get you a link off ebay.

 

[micasb]

Rear:

Audi A3 8P 3,2l Niveausensor 8P.1/45 | eBay

Front:

Original Audi A3 8P TT Niveausensor mit Gestänge linke Seite 8J0941273G | eBay

Cheers

 

[nally]

are they the auto leavlers?

 

[micasb]

I made this search:

audi Niveausensor | eBay

All from TT are ok for you.

 

[micasb]

Yes.

This is only for the autoleveling function.

 

[nally]

are you puttling DRl's in or the 8p2 xenons?

 

[micasb]

Mine is pre-facelifted..

 

[nally]

fair enough you avitar looks like an 8p3

 

[micasb]

fair enough you avitar looks like an 8p3

LOL

Does it? I Wish...

 

[NHN]

You'll need more than that, wiring sensors, coding, headlights, can modules, power modules & the levelling controller plus vcds to make sure it all codes up & works, if you get frightened by it all, give me a shout, I could do with a trip to Ireland with family

 

[niallraff]

Thanks guys , is the rear sensor different in a quattro compared to a dsg ? NHN might me interesed in a auto leveling/corning loom as ive heard on here the kauftec looms are pure s***Thanks Again

 

[NHN]

Sorry I dont supply looms, only installs of which I make looms for.

 

[niallraff]

So guys got my Bi Xenon's installed and i must say its one of the best mods i've done yet comming into the winter. I have not got round to fitting the conering or auto leveling yet, still getting the parts .
I was wondering if it's worth doing as i cant see it improving the lights much, and i know about the legal issues .

 

[micasb]

So guys got my Bi Xenon's installed and i must say its one of the best mods i've done yet comming into the winter. I have not got round to fitting the conering or auto leveling yet, still getting the parts .
I was wondering if it's worth doing as i cant see it improving the lights much, and i know about the legal issues .

Believe me... It's worth it...

 

[niallraff]

Wel thats that answered, lol, just need to get my elsawin sorted for a few electrical drawings and then make up my own loom.