R32 Throttle body

[AGU-TURBO]

does badger5 or anybody make these adapter's to fit the r32 throttle body to the 1.8t manifold

borrowed pics from another forum that badger posted

1.8T

R32

 

[Andrew@A.L.D]

I do but whats your spec of the engine as when i fitted mine i didn't feel any difference at all

 

[<tuffty/>]

Yes, Badger 5 does the adaptors... I run one on mine...

As Andrew suggests though, I am not sure what benefits you would get without going BT tbh...

<tuffty/>

 

[<tuffty/>]

...have a read from here...

http://www.audi-sport.net/vb/a3-s3-...s-s3-minor-modding-thread-17.html#post1065601

<tuffty/>

 

[AGU-TURBO]

Yeh im just in the middle of thinking on what to do.

are you using bigger pipes with the r32 tb on.

andrew how much do you want for one of these?

 

[Andrew@A.L.D]

I charge the same as Badger5

I use bigger pipe and so dose tuffty

Not worth it on a K04

 

[Dani_B19]

Whats bill charge for one?

 

[AGU-TURBO]

can you pm me a price please

 

[AGU-TURBO]

Does anybody no if i can convert this so i can use my cable throttle?

 

[Andrew@A.L.D]

Awesome GTI did on a Mk2 Golf GTI with a 1.8 Turbo in it

 

[AGU-TURBO]

Just got a bargain - Well i think lol will have to see when it comes

VW Golf R32 Throttle body 022133062 AG on eBay (end time 13-Jul-11 18:17:48 BST)

 

[AGU-TURBO]

Awesome GTI did on a Mk2 Golf GTI with a 1.8 Turbo in it

Cheers mate i will have a look into it when it comes

 

[<tuffty/>]

Check this link out....
SpeedArena.com - MK1 Golf Four Wheel Drive with MK5 R32 Turbo Lump (Under Construction)

...scroll down a bit and there are pics of one being converted

<tuffty/>

 

[aragorn]

Surely that "conversion" loses all idle control?

A proper cable throttle still has a motor inside which it uses to adjust the throttle flap to allow the car to adjust its idle speed for cold starts etc...

 

[Andrew@A.L.D]

doesn't a VR6 one fit and its large in size and cable operated ?

 

[Dani_B19]

Andrew could you fabricate a adaptor plate for a golf 4motion TB for s3 inlet manifold? Also hows the large port custom manifold coming on?

Agu-turbo you have got a bargain indeed.

 

[AGU-TURBO]

doesn't a VR6 one fit and its large in size and cable operated ?

lol funny you should say that ive just been reading on another forum and it yes it apperently does fit. looks like this r32 tb will be back on ebay lol. will try and get a vr6 2.9 tb obd2. back to the drawing board lol.

Thanks for all the reply

 

[Andrew@A.L.D]

Golf 4motion/R32 adaptor like the one tuffty posted above??

Not touched it for some time as i'm waiting for some spare cash to come up as there are other things on the car that needs to be sorted out first

 

[AGU-TURBO]

Surely that "conversion" loses all idle control?

A proper cable throttle still has a motor inside which it uses to adjust the throttle flap to allow the car to adjust its idle speed for cold starts etc...

Hi yes that is true and i was going to try and retain this one way or another - but looks like the vr6 tb is the Boy!

 

[Dani_B19]

Yeah mate, isnt the one tufty posted just for a r32 tb though? The 4motion is slightly smaller.

 

[Dani_B19]

Tufty, you dropped the r32 tb yrt or you sticking with it?

 

[<tuffty/>]

Tufty, you dropped the r32 tb yrt or you sticking with it?

The car is hopefully going on the dyno this weekend. I am still running the std TB atm but depending how the dynoing goes I may swap over to the R32 TB on the std mani for a direct comparison and if I get time etc I also plan to see if I can try it with the SEM inlet too... just depends on how busy Bill gets etc really..

<tuffty/>

 

[Dani_B19]

Be good to see the comparison between the standard one and the r32 one. Hope the dyno goes good, you having a mapping session?

 

[<tuffty/>]

...Hope the dyno goes good, you having a mapping session?

Yarp... trying out the latest revision...

<tuffty/>

 

[leon14]

lol funny you should say that ive just been reading on another forum and it yes it apperently does fit. looks like this r32 tb will be back on ebay lol. will try and get a vr6 2.9 tb obd2. back to the drawing board lol.

Thanks for all the reply

Ill have the r32 TB off you for my LCR