OMG - just picked up new 2.0T quattro - wow!

[dubdemand]

I beleive so - plenty of people on here with lowered A4's running close to or at ET35 with out trouble! Have a look in the B6 forum, there's a really useful thread all about spacers in there!

Here it is: http://www.audi-sport.net/vb/a4-a4-cabriolet-s4-forum-b6-chassis/111034-spacers.html

 

[razza1]

Just spoke to the previous owner

It's got 15mm Eibach lowering springs on it and an APR stage 2 remap. I'm just trying to find out how much this should produce from APR etc.

Hasn't got an RS4 ARB so will look to get that done after I get some spacers on it.

It was one of the last runs of the V2 special editions and Newcastle Audi threw every option at it except for front parking sensors and the sun roof....


knew it felt a lot quicker than my old one

 

[razza1]

Spoke to APR and reckon it's around 265-270ish BHP and 320ish Lb/ft

Also just ordered my spacers, 10mm rear/5mm front

 

[razza1]

gear stick:

exhaust and remap were done at Awesome GTI apparently.

 

[dubdemand]

Love the gear stick... wonder what it's off?

Look forward to seeing the new pics with the spacers! Where did you order them from?

 

[razza1]

no idea, love it though, got the spacers here:

http://www.audi-sport.net/vb/a4-a4-cabriolet-s4-forum-b6-chassis/111034-spacers-new-post.html

look near the bottom for my ebay link

 

[si hoc]

no plans yet, there's definately something different about it, the engine bay looks slightly different to my old one, there seems to be the turbo heatshield missing off it for starters

I can hear the turbo spooling, similar to when I had the Supra, and there's some extra cabling in the engine bay...will get some photos done to see if anyone knows anything...

whats jason statham doing taking pics of your car lol

 

[ChrisFurlong]

Some videos would be lovely I just want to hear the exhaust. Just picked up a 2.0T Quattro, and want a bit more noise as my old 3.2 with RS4 exhaust had.

And the carbon pillars, they look like there just wrapped in 3M vinyl. Are they?

 

[razza1]

yeah, the rear diffuser and pillars are carbon vinyl wrap. The interior dash/door inlays are the original audi carbon fibre ones though

will get a video done once Audi have fixed my gearbox...

 

[razza1]

after spacers:

 

[jwhat]

I'll have to add spacers to my list now, they look really good.

What size did you go for?

 

[razza1]

5mm front and 10mm rear.

 

[razza1]

cupra splitter and RS4 ARB to fit and callipers to paint...not sure whether to go red or black though...??

 

[chrisa4quat]

Best mod ever. So cheap, yet so effective.

What's this?

 

[chrisa4quat]

As above this is the SRB? or is it meant to be ARB?

 

[razza1]

thiunk he meant ARB...Anti Roll Bar (rear one)

 

[razza1]

so found a K&N panel filter in the airbox, and after speaking to APR again (as last time didn't realise it had the HPFP and filter), they reckon a stage 2+ with the mods I have is 280BHP/325ft/lb

 

[solaris]

so found a K&N panel filter in the airbox, and after speaking to APR again (as last time didn't realise it had the HPFP and filter), they reckon a stage 2+ with the mods I have is 280BHP/325ft/lb

Get it on the rollers!!!

 

[razza1]

where's a reliable RR, see you're in Berkshire?

 

[unikarl]

I really like the S4 wheels.... Need to track some down now

 

[razza1]

I'm happy they were on there to be honest, as most cars have the RS4 style wheels now, even 2.0TDI's (no offence), so its good to be different..(plus they're much easier to clean!!)

 

[solaris]

where's a reliable RR, see you're in Berkshire?

Got mine done from Motorworks in Marlow, really good guys, I used to use these guys a fair bit when I had my Evo. I'd be supprised if you get 280BHP/325lb from the APR map. Good luck mate

 

[unikarl]

I'm happy they were on there to be honest, as most cars have the RS4 style wheels now, even 2.0TDI's (no offence), so its good to be different..(plus they're much easier to clean!!)

None taken.... I've joined the LM crew but still prefer the S4 wheels

 

[razza1]

Got mine done from Motorworks in Marlow, really good guys, I used to use these guys a fair bit when I had my Evo. I'd be supprised if you get 280BHP/325lb from the APR map. Good luck mate

I'll have to see if I can get over there and see what it pushes out. What did yours have on the APR map (and did you have the smae mods you have now)?

 

[dubdemand]

If you're looking for a rolling road then I don't think youll do better than calling Surrey rolling road. My mate Charlie runs it - give him a buzz and tell him Phil Kett recommended him.

Surrey Rolling Road

Better location for you as well I'd guess?

 

[55_UK]

beautiful stance!

 

[razza1]

yeah, the spacers make a massive difference with the lowered springs

 

[razza1]

RS4 ARB being fitted tomorrow don't have time to fit it myself (or let the missus know I've bought it lol), so garage is picking the car up tomorrow, fitting it and delivering it back.

Looking forward to the back roads on way home tomorrow night

 

[Sam W]

lol, top modding, keep the missus oblivious!

 

[razza1]

well, if she can blow £250 on clothes last week I think I'm well within my rights...but will keep it quiet anyway

 

[Sam W]

£250??? I'd say you're well within mate!!!

 

[razza1]

That's what happens when you marry a fashion buyer...

 

[Sam W]

Haha, I see, I see! You could do worse mate

 

[Abb]

Lovely motor mate, looks the nuts! Clear corners on your headlights too.....tasty!

 

[razza1]

thanks, the clear corners came on the V2 Spec editions, makes it look much cleaner. ARB being fitted as we speak, then its the splitter on Friday and callipers to black next week

Then just need to find the time to clean the miltek up...

 

[razza1]

looks like its an RS4 one
Shift Knob - RS4 Perforated [8E0863278DRTAV] - $395.00 : OEMplus.com, Original Equipment

 

[razza1]

just fitted the cupra splitter (which is now just above the curb height, so need to be careful now...):

and a lizard seemed to like the rear... (although undecided yet...)

 

[mikeyw]

Splitter looks good. I need to get myself one.

 

[Ash B]

Looks good fella, i need to get another lcr splitter

 

[razza1]

Just a couple more pics after a clean and Cambelt change. Have added rs4 fog grills and rear spoiler and removed the lizard from the boot...