Needle Sweep on S3

DaztheGuv

Member
VCDS Map User
Joined
Apr 9, 2011
Messages
72
Reaction score
1
Points
6
Location
Stoke on Trent
Hi I have just purchased a S3 on a 07 plate, and I was wondering if the needle sweep could be activated on it?
I had a test drive in a 57 plate one and that did it as soon a you turned the key, the 57 plate one did have a white DIS, where as mine has red (not sure if this has any bearing on the matter)

I'm a newbie so please go easy on me :redface:

Thanks,

Daz.
 
unfortunately it does have a bearing lol
the needle sweep is only a feature on the white S3 cluster and no other (on the A3 chassis) which is a pain as it means a whole new cluster to get it
 
  • Like
Reactions: DaztheGuv
The white dis was retrofitted on a 57 plate tbh, I cant recall when it came in, but was around 07-08 onwards, need to get vcds on the car to see if its possible in coding.
 
  • Like
Reactions: DaztheGuv
I have the needle sweep on my 57 plate, and I have the red dis, not the White dis.

I'm pretty sure you can enable/disable it in vcds, but perhaps you need a 57 plate onwards to do it?
 
  • Like
Reactions: Adamj
Aha I was right, 07 it was then & yes you can enable with vcds.
 
the needle sweep is rad....:sex:
 
Boycie, time to get your modding cap out, white dis time :p
 
The sweepeth of thy needles mr smoothie :)
 
Same as Boycie's, pre 08 facelift S3's, needle sweep was out in 07 which were still red dis types.
 
is that just an S3 thing or would it work on my 10 A3 Sport Sportback?
 
S3, R8 are few works on & no its not an A3 thing, also comes with lap timing aswell.
 
Get your vag on it mate, see if it accepts coding & then you'll know.
 
My july '07 S3 with red DIS does the sweep...
 
I take it because there is a long coding helper here in the engine:

LONGCODINGHELPER.jpg


and not in instruments:

LONGCODING.jpg


that I cannot activate needle sweep?
 
Adaptation channels may help you Boyccccccieeeeeeeeeeeeeeeeeeeee
 
Mate the helper pops up & pretty much tells you what to input.
 
Thanks, for the help guys. It went in to the dealer today to have iPod connection fitted, and I asked them if they could do it, was told by the dealer (Crewe Audi) that my software on the car is too old, and that it only come into place in 2009. Is there anyway of updating the software? What differences are there?
Thanks,

Daz.
 
Thanks, for the help guys. It went in to the dealer today to have iPod connection fitted, and I asked them if they could do it, was told by the dealer (Crewe Audi) that my software on the car is too old, and that it only come into place in 2009. Is there anyway of updating the software? What differences are there?

Well they're talking crap given reports by 07 owners on here already with on red dis, need to get vcds on there to see if possible to code.

There is no mention in the pop up of needle sweep.

I guess mine is too old.

If you have no adaptation channel there for it, then time to fit a white dis.
 
Does it matter if it's an TDI ? Or is it only S3's ?
 
It is only on S3's, R8 & maybe few other higher end S version type cars.

Boycie, new they're about £6-700
 
Thanks everyone, I'm gonna have a go at it with VCDS tomorrow, anyone ever done this? Can anyone help me with a step by step? Fingers crossed :)
 
Yea same as, was good at first but now.....its boring!
 

Similar threads

Replies
15
Views
2K
Replies
5
Views
1K
Replies
10
Views
3K
Replies
6
Views
2K