so dean what else will i need definatly as my car is does not have xenons fitted. are the headligh washers. why a bigger bottle and pump??
Can of worms this and will cost ££££ but can be done.
You'll need leveling sensors on all four axles to start with + wiring, (You don't have to but to be legal it is a requirement in addition to headlight washers) hence bumper compatible with headight washers)
Larger bottle due to additional water consumption of headlight washers, hose and pump is for the high pressure headlight washers.
New high end Central Electrics module to accomodate coding of the LED Xenons.
Facelift LED Headlights
And to fit these lights you need facelift lock carrier, bumper, wings, bonnet and LED indicator mirrors(+ door modules) at the minimum.
So in other words the key to your facelift centres around the LED headlights.
I'm sure someone will be along to add to the above or correct me if I'm wrong.
Yes it's vicious cycle!
Or, you could use the facelift non-LED headlights, a lot easier but probably not what you're looking for...
Good luck (and a fat wallet) is all I can say!