This is to hopefully help out people trying to fit the Toyosport intercooler.
before you start make sure you got everything in this photo
start by taking the impact bar off to mount in the cooler, this how i did mine
once you have put the brackets on to the impact bar you can now attached the intercooler onto the brackets
you will need to drill a hole in the pastic cover infront of the arch liner, i used a 72mm hole saw
next put the 180degree and the 90 degree pipes together like this
attch the end on the 180 degree pipe to the intercooler and put the other end into the arch liner
look into the engine bay and you will see the top of the 90degree pipe, attched the large 90 degree pipe onto the smaller 90 degree pipe
now find the 2 small pipes and connect them like this
you need to fine the silicone reducer to go from the larger 90 degree pipe to the small pipe
the problem i had was the toe eye was in the way, only way around this is to get a custom pipe or cut it off, so i just cut it off
at this point you should only have 2 pipe left, connect them like this
attach one end to the intercooler and the other to the throttle body
should look like this from inside the engine bay
and like this from outside the car
