NEED INFO ON A4 B6 SALOON TDI TWIN EXIT EXHAUST CONVERSION

[BKZ187]

CAN YOU PLEASE POINT ME IN THE RIGHT DIRECTION?

I have the 1.9TDi SPORT and want the 1.8T backbox with the twin exit exhaust pipes on either side.

Surely there are a few write ups?

thanks!!

 

[paul20v]

There are give the search function a bash mate

 

[BKZ187]

not had much luck

would like a write up!!

 

[quattrojames]

There's loads of write ups on this!

Give chrisash32 a PM as he's got a 1.8T system for sale I think. Besides that you need a new lower rear valance with twin exits.

 

[scott b]

as above, new lower valance, this is held on with screws, 2 in each wheel arch, and 1 either side about 25 cm from the wheel arch, and then a few underneath

you will need to remove 2 plastic covers from under neath the car

fitting the exhaust is easy with an extra pair of hands, just unbolt it from the hangers and undo the clamp that links it to the cat pipe, just remember to un hook the hand brake cable i think it is, the new exhaust just bolts back up, just make sure you have all the hangers and 2 extra 13mm bolts

 

[Garfie]

As scott says, a 1.8T twin exhaust will fit straight on the 1.9TDi front exhaust section. I did mine recently.

Apart from the exhaust and suitable valance I also needed 1 new rear box exhaust hanger, two bolts for the hanger, a heatshield to go above the offside rear box and 4 speed nuts to hold the heatshield in place.

 

[scott b]

heat shield is optional lol, i couldnt be ***** to fit one lol

 

[BKZ187]

thanks for the help lads

now, I take it I need the complete 1,8T exhaust from cat back?
What joint is at the cat?

 

[Garfie]

Its just a sleeved joint with 2 clamps that are part of the exhaust, no extra bits needed there.

 

[richie_jones]

As scott says, a 1.8T twin exhaust will fit straight on the 1.9TDi front exhaust section. I did mine recently.

Apart from the exhaust and suitable valance I also needed 1 new rear box exhaust hanger, two bolts for the hanger, a heatshield to go above the offside rear box and 4 speed nuts to hold the heatshield in place.

Could you give me a rough cost for this mod, i`m interested in it to....Any chance of any pics of the rear of your avant...Mines an avant quattro...

 

[mlody]

U can also get a 2.5tdi full exhaust system, I got a 2.0 tdi from B7 BRD and fitted no bother. And make sure u get a fwd one, quattro wont fit if urs is fwd!

 

[Garfie]

Could you give me a rough cost for this mod, i`m interested in it to....Any chance of any pics of the rear of your avant...Mines an avant quattro...

Richie if yours is a quattro you will need to make sure the exhaust you get is from a quattro too as a FWD one will not fit.

Its hard to put a cost to the mod as it depends how much you can get the exhaust and your choice of rear valance for. Exhausts generally go for between £60 and £120 it just depends how lucky you are.

As for a pic I'll see what I can do.

 

[scott b]

i paid £200 for the rear bumper and exhaust then plus paint

fitted the exhaust and bumper myself

 

[BKZ187]

which rear bumper did you fit?

The basic one? sport? votex? or ABT?

I have a Votex front bumper, Votex side skirts and maybe an ABT rear twin exit lower bumper on the way. What do you reckon? will it look right?

thanks

 

[scott b]

i fitted the S line/1.8 TURBO one

any pics, as not sure what the ABT one looks like

 

[BKZ187]

here it is

still think I prefer the Votex rear

Parts Depot for Volkswagen, Audi, Seat, Skoda, BMW

 

[scott b]

think it could work

 

[BKZ187]

OK so I bought chrishash's 60mm tipped twin exit exhaust !!

and I am going for the ABT Rear for now

but have found a decent supplier in the usa for the votex rear. I need to order the votex rear grilles for the twin exit. Does anyone know the part number?

 

[Mcgough]

Like this....

£67 for bumper, £55 to spray and £400 for exhaust.

and i did it again on my next avant..

 

[Mcgough]

and i Plan to do it again on my new avant although still cant find the right bumper code.

 

[BKZ187]

I got my conversion done with the ABT rear
cost a couple of hundred but it does transform the car ALOT
So I have ended up with Votex front with cupra lip
Votex side skirts and kept my door blades
ABT rear skirt with 1.8T exhaust conversion
Xenon headlight upgrade

 

[BKZ187]

Oh and yes - I will be debadging - just havent got round to it!

 

[Widemonkeys]

Hi where did u get the b6 avant bumper so cheap

 

[chrisash32]

Looks spot on!!! Really Impressed! Glad you got it all sorted

 

[BKZ187]

come round whenever you can, chris

have a look round it

 

[quattrojames]

Very nice looking car mate :thumbsup:

 

[BKZ187]

Very nice looking car mate :thumbsup:

which one matey? red or black?

 

[quattrojames]

which one matey? red or black?

The black one mate, yours! Your thread, your compliment :thumbsup:

 

[BKZ187]

haha thanks!!