I've got a B7 A4 and have just changed over the slip ring, steering control module, steering wheel and fitted cruise. I've gone through the Rosstech steering sensor calibration nearly 8 times but the ABS light is still on and I constantly get this error:
Address 03: ABS Brakes Labels: 8E0-910-517.LBL
Control Module Part Number: 8E0 910 517 B HW: 8E0 614 517 AT
Component and/or Version: ESP8 front H04 0180
Software Coding: 0004401
Work Shop Code: WSC 06335 000 00000
VCID: 26470E99E88F
Fault Codes have been Erased
1 Fault Found:
00778 - Steering Angle Sensor (G85)
008 - Implausible Signal
Freeze Frame:
Fault Status: 01101000
Fault Priority: 2
Fault Frequency: 1
Reset counter: 40
Time Indication: 0
Freeze Frame:
Hex Value: 0x0000
Hex Value: 0x4222
Hex Value: 0x00FF
Hex Value: 0xFFAE
Hex Value: 0x00FF
The other interesting thing is that in the ABS screen, the alignment status reads "locked" as opposed to "OK".
I know the steering control module came from an RS4, would it be this?
Address 03: ABS Brakes Labels: 8E0-910-517.LBL
Control Module Part Number: 8E0 910 517 B HW: 8E0 614 517 AT
Component and/or Version: ESP8 front H04 0180
Software Coding: 0004401
Work Shop Code: WSC 06335 000 00000
VCID: 26470E99E88F
Fault Codes have been Erased
1 Fault Found:
00778 - Steering Angle Sensor (G85)
008 - Implausible Signal
Freeze Frame:
Fault Status: 01101000
Fault Priority: 2
Fault Frequency: 1
Reset counter: 40
Time Indication: 0
Freeze Frame:
Hex Value: 0x0000
Hex Value: 0x4222
Hex Value: 0x00FF
Hex Value: 0xFFAE
Hex Value: 0x00FF
The other interesting thing is that in the ABS screen, the alignment status reads "locked" as opposed to "OK".
I know the steering control module came from an RS4, would it be this?