Just got a replacement lid/door from Audi, as mine is scratched to buggery. Removed the whole glove box unit assembly which was easy enough. Getting the door/lid off is a different matter, appears to be on a couple of lugs that dont seem removeable. Anyone done this before?
Anyone know how to remove the glove box lid/door
- Thread starter chris_marshall
- Start date
Download the guide for the A3 interior: http://myweb.tiscali.co.uk/macnee/a3_interior.zip
Has a complete guide to remove you have afew pins and lugs to remove
Has a complete guide to remove you have afew pins and lugs to remove
Thanks, they certainly make it easier in the pics, I have managed to get one out, but the other one in the blind hole is impossble to get at
arsenal_69r
audi a3
- Joined
- Nov 30, 2009
- Messages
- 156
- Reaction score
- 1
- Points
- 16
arsenal_69r
audi a3
- Joined
- Nov 30, 2009
- Messages
- 156
- Reaction score
- 1
- Points
- 16
Right all sorted. Was an absolute pig of a job as the only thing you can get in there is a small flat screwdriver, and you cant see what your even levering out plus th fact there put in with adhesive. Was about £40, on a bit of a mission with it atm, got the TT pedals at the same time, and just orderd some Andymac front speaker brackets and a whole new set of speakers
Hi Jester, I've got a sheered off glove box lid on my 2007 A3 Sport Quattro 2.0 TDI and want to replace it, I assume the dampener will also needs lubricating as well (probably what caused the sheer in the first place). I don't want to go to the steelers for obvious reasons and as this isn't a life threatening part, i'd like to have a go at repairing/replacing it myself. Any chance you have the latest Workshop manual as this one says it's for models from 1997. Or if you have any links to any good walkthroughs on how to remove just the lid preferably or the whole glove box.
Cheers
