Note: Excessive Comm Errors

[Ryanmt]

Is there any more information avaliable on this?

When i do a full scan i get the following



Address 31: Engine other
Protocol: KWP2000
Controller:
Note: Excessive Comm Errors


Is it anything to be worried about?

04 Sline Avant 1.8T Quattro

 

[JST_A3]

Please post a full scan so we can see the rest of the information, there's not a lot to go off here....

 

[Ryanmt]

Address 01: Engine
Protocol: KWP2000
Controller: 8E0 909 518 AS
Component: 1.8L R4/5VT 0003
Coding: 0011711
Shop #: WSC 63251

Address 03: ABS Brakes
Protocol: KW1281
Controller: 8E0 614 517 A
Component: ABS/ESP allrad 4529
Coding: 04475
Shop #: WSC 06435

Address 08: Auto HVAC
Protocol: KW1281
Controller: 8E0 820 043 AC
Component: A4 Klimaautomat 1424
Coding: 00000
Shop #: WSC 63251

Address 09: Cent. Elect.
Protocol: KW1281
Controller: 8E0 907 279 F
Component: int. Lastmodul RDW 0517
Coding: 00001
Shop #: WSC 63251

Address 15: Airbags
Protocol: KWP2000
Controller: 8E0 959 655 J
Component: Airbag 8.4EP 1002
Coding: 0010602
Shop #: WSC 63251

Address 16: Steering wheel
Protocol: KW1281
Controller: 8E0 953 549 S
Component: Lenksáulenmodul 0611
Coding: 01012
Shop #: WSC 63251

Address 17: Instruments
Protocol: KW1281
Controller: 8E0 920 950 N
Component: KOMBI+WEGFAHRS. RB4 D42
Coding: 01401
Shop #: WSC 00000

Address 25: Immobilizer
Protocol: KW1281
Controller: Bit teA dre ss
Component: e 17 eingeben

Address 31: Engine other
Protocol: KWP2000
Controller:
Note: Excessive Comm Errors

Address 33: OBD-II
Protocol: KWP2000
Controller: OBD-II/EOBD

Address 45: Inter. Monitor
Protocol: KW1281
Controller: 8E0 951 177
Component: Innenraumueberw. 0704
Coding: 00001
Shop #: WSC 00000

Address 46: Central Conv.
Protocol: KW1281
Controller: 8E0 959 433 BD
Component: Komfortgerát TBF 1612
Coding: 07115
Shop #: WSC 63251

Address 56: Radio
Protocol: KW1281
Controller: 8E0 035 195 M
Component: symphony II PM6 0410
Coding: 01000
Shop #: WSC 65536

 

[bearthebruce]

That is not an autoscan. It is a control map scan. Please post a full autoscan.

 

[NHN]

It would appear you're possibly scanning a controller that the car doesnt actually support I'd say, as I've never personally seen that module used in your car chassis, so if this is true, then there is no fault, maybe Bruce can advise further if my assumption is correct for your B6.