Vag Com Codings after retrofitting RNS-E

[comc]

Hello
I have scanned through previous posts on this subject but most do not exactly provide the answers I need and most assume a certain level of experience using vag com.
I have a 2006 MY A4 Avant which came with factory phone prep and colour DIS, but no MFSW.
I have now added an RNS-E (Q version) unit and want to make sure that the phone prep, RNS-E, and colour DIS are all set up to speak to each other fully.
I have asked the assistance of forum member Sno who has kindly agreed to provide the vag com equipment, however I would really appreciate it if someone could provide me with the correct vag com values, in a simplified form, to allow me (with the help of Sno) to make the necessary changes.
If anyone knows of a clear instruction already out there in this or another forum then could you please point me in the right direction.
Many thanks

[Khufu]

you could have a look at some of these options


http://wiki.ross-tech.com/index.php/...em_%28RNS-E%29

[comc]

you could have a look at some of these options


http://wiki.ross-tech.com/index.php/...em_%28RNS-E%29

Thanks Khufu.
I had managed to find the info at the Ross Tech site since posting my original question. I think I have now got my codes sorted out and will get together with forum member Sno in the near future to have a little play.
Thanks again for taking the time to respond.

[NHN]

If the vagcom user knows his way round, then the modules each have a popup helper that advises the coding anyway for a given setup, so should be fairly straight forward.