auto scan from a novice

[heliflyer]

Hi just plugged vag com into van before i use it on car did a auto scan the fault codes shown dont highlite in red so cant do anything with them is there another way to remove or is it that they not hurting anything cos they intermittant and dont need to be removed any help appreciated

ps VDCS version is now latest from ross tech 805.03 i believe


VCDS Version: Release 805.0
Data version: 20090213
Tuesday,21,April,2009,15:36:22:50181
Chassis Type: 9K - VW Caddy
Scan: 01 03 15 25 46 56

VIN: XXXXXXXXXXXXXXXXX
-------------------------------------------------------------------------------
Address 01: Engine Labels: None
Part No: 038 906 013 AN
Component: 1,9l R4 EDC 0000SG 2171
Coding: 00002
Shop #: WSC 06402
2 Faults Found:
17664 - Engine Coolant Temp Sensor (G62): Open or Short to Plus
P1256 - 35-10 - - - Intermittent
00741 - Brake Pedal Monitoring
27-00 - Implausible Signal
Readiness: N/A
-------------------------------------------------------------------------------
Address 15: Airbags Labels: 1J0-909-60x-VW3.lbl
Part No: 1J0 909 603 CD
Component: AIRBAG VW3 - V04
Coding: 17220
Shop #: WSC 06402
No fault code found.
-------------------------------------------------------------------------------
Address 25: Immobilizer Labels: None
Part No: 6X0 953 257
Component: IMMO 0008
Coding: 00001
Shop #: WSC 00000
XXXXXXXXXXXXXXXXX VWZ1Z0A1412998
No fault code found.
End ---------------------------------------------------------------------

 

[bearthebruce]

Hi just plugged vag com into van before i use it on car did a auto scan the fault codes shown dont highlite in red so cant do anything with them is there another way to remove or is it that they not hurting anything cos they intermittant and dont need to be removed any help appreciated

You remove the faults by clearing the DTCs. If the Clear all DTCs button was not active when the scan finished, then you go into each module and clear the fault codes there.

For example: [Select][Engine - 01][Fault Codes][Clear DTCs]

ps VDCS version is now latest from ross tech 805.03 i believe

That is correct and you can download that version. There were some minor bugs in version 805.0. You should update.

VCDS Version: Release 805.0
Data version: 20090213
Tuesday,21,April,2009,15:36:22:50181
Chassis Type: 9K - VW Caddy
Scan: 01 03 15 25 46 56

VIN: XXXXXXXXXXXXXXXXX
-------------------------------------------------------------------------------
Address 01: Engine Labels: None
Part No: 038 906 013 AN
Component: 1,9l R4 EDC 0000SG 2171
Coding: 00002
Shop #: WSC 06402
2 Faults Found:
17664 - Engine Coolant Temp Sensor (G62): Open or Short to Plus
P1256 - 35-10 - - - Intermittent
00741 - Brake Pedal Monitoring
27-00 - Implausible Signal
Readiness: N/A

I suspect your temp sensor is on it's way out. Or if not the sensor itself, the wiring is going on the fritz. Not sure what is going on with the brake pedal.

You can look up the fault code in the Ross-Tech Wiki to see if offers more assistance.

 

[heliflyer]

Thanks for that bruce just wanted it confirming as it was first time plug in, see buying the correct lead already started paying for itself cheers Ian