Engine "readiness"

bikefright

Registered User
Joined
Dec 18, 2003
Messages
43
Reaction score
0
Points
6
I have two "failed/incomplete" items listed under engine readiness:

Oxygen Sensor
Secondary Air Injection

What on earth is the second item??

******Updated******

This is the VAG-COM FAult Code output, note I have resolved the last three items (replaced all 6 ignition coils):

Thursday, 10 May 2007, 11:44:39
VAG-COM Version: Release 409.1-US
Control Module Part Number: 8E0 909 559 M
Component and/or Version: 3.0L V6/5V G 0010
Software Coding: 0011751
Work Shop Code: WSC 00411

4 Faults Found:

16815 - Warm Up Catalyst: Bank 2: Efficiency Below Threshold
P0431 - 001 - Upper Limit Exceeded

16684 - Shareware Version. To Decode all DTCs
P0300 - 001 - Please Register/Activate - Intermittent

16690 - Shareware Version. To Decode all DTCs
P0306 - 001 - Please Register/Activate - Intermittent

16687 - Cylinder 3 Misfire Detected
P0303 - 001 - Upper Limit Exceeded - Intermittent
 
A guess: 2nd one could be something to do with AGR.
 
Thanks icenutter - i've updated my post as I'd made some important mistakes in the post, maybe this might help diagnosis. I've added VAG-COM output too.
 
Just found a PDF here, I know it'f for a TT, but the principal is most likely the same:

http://www.wak-tt.com/guides/sec_air.pdf

This links my Secondary Air Injection issue with the Warm Up Catalyst.

I'm going to check all my vacuum hoses at first as the car has just had a sevice at a stealership.......