VagCom Faults, advice needed.

[terrymcg]

Hi,

Can any guru tell me what causes these faults and how to rectify them:

VAG-COM Version: Release 607.3-UD

Control Module Part Number: 8P0 959 801 H
Component and/or Version: Tuer-SG 020 0090
Software Coding: 0000632
Work Shop Code: WSC 06314
1 Fault Found:
00932 - Electric Window Motor; Drivers Side (V147)
005 - No or Incorrect Basic Setting / Adaptation – Intermittent

VAG-COM Version: Release 607.3-UD

Control Module Part Number: 8P0 959 802 H
Component and/or Version: Tuer-SG 020 0090
Software Coding: 0000632
Work Shop Code: WSC 06314
1 Fault Found:
00933 - Electric Window Motor; Passenger Side (V148)
005 - No or Incorrect Basic Setting / Adaptation – Intermittent

VAG-COM Version: Release 607.3-UD

Control Module Part Number: 1K0 907 530 G
Component and/or Version: J533__Gateway H10 0140
Software Coding: 7F0F074007000101
Work Shop Code: WSC 06314
1 Fault Found:
01044 - Control Module Incorrectly Coded
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 1
Fault Frequency: 1
Reset counter: 240
Mileage: 18549 km
Time Indication: 0
Date: 2007.02.04
Time: 16:33:36

VAG-COM Version: Release 607.3-UD

Sunday,04,February,2007,16:46:22

Gateway Installation List: 1K0 907 530 G

00-Steering Angle Sensor -- Status: OK 0000
01-Engine -- Status: OK 0000
02-Auto Trans -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: Malfunction 0010
25-Immobilizer -- Status: OK 0000
37-Navigation -- Status: Not registered 0001
42-Door Elect, Driver -- Status: Malfunction 0010
44-Steering Assist -- Status: OK 0000
46-Central Conv. -- Status: OK 0000
52-Door Elect, Pass. -- Status: Malfunction 0010
55-Xenon Range -- Status: OK 0000
56-Radio -- Status: OK 0000
76-Park Assist -- Status: OK 0000

 

[bearthebruce]

You can find at least some of the codes on the Ross-Tech Wiki. Take a look here:
http://wiki.ross-tech.com/index.php/Category:Fault_Codes

 

[Uwe@Ross-Tech]

A registered user could e-mail Support@Ross-Tech.com and get detailed instructions for fixing the CAN Gateway and Navigation issues.

-Uwe-

 

[terrymcg]

Got it sorted now guys!

Thanks!

 

[shineydave]

care to share the solution with the rest of the forum?