Volks AutosJMB Retrofits
Results 1 to 5 of 5

Thread: Idea on codes

  1. #1
    rodenal's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Oct 2006
    Posts
    1,982

    Idea on codes

    Im relatively new to vag com and have been running a few checks on my car, can anyone give me a bit more information on what the following codes mean(if im being an idiot please feel free to tell me also lol)



    Chassis Type: 8L - Audi A3/S3
    Scan: 01,02,03,08,15,17,22,35,37,45,54,55,56


    Address 17 -------------------------------------------------------
    Controller: 8L0 919 910 A
    Component: AB-KOMBIINSTR. VDO D07
    Coding: 08442
    Shop #: WSC 00000
    IMMO-IDENTNR: AUZ7Z0T0031761
    1 Fault Found:
    01176 - Key
    07-00 - Signal to Low
    Address 35 -------------------------------------------------------
    Controller: 8LO 862 257 A
    Component: ZV-Pumpe, DWA
    Coding: 01288
    Shop #: WSC 06313
    1 Fault Found:
    01367 - Central Locking Pump Run Time Exceeded (Likely Leak)
    35-00 - -


    I'm particularly confused by the key signal code, what exactly does that mean?

    any help appreciated
    *Gone* 1997 A3 1.6 facelift headlights, 16"1.8t Alloys, full rear tints. 110k

    You built a time machine.........out of a delorean!?!?!

  2. # ADS
    ADS
    Join Date
    Always
    Posts
    Many
     
  3. #2
    dsmclark40v's Avatar
    4th Gear

    Status
    Offline
    Join Date
    Sep 2006
    Location
    Hampshire
    Posts
    715
    The first one could be something to do with the coil behind the ignition for the immobiliser. I think there is something where the wiring gets streched or something. does the car fail to start sometimes and you get a flashing key on the dash?
    I get the central locking pump run time exceeded (likely leak) some times but i clear it and it won't come back for months. i think it just needs the tubes from the pump pushed back down a bit or something

  4. #3
    DPM
    DPM's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Jun 2006
    Location
    Newcastle/Durham
    Posts
    4,284

    My Social Networking

    Follow DPM On Twitter Add DPM on Facebook Visit DPM's Instagram Channel
    I always get that 'Central Locking Pump' fault code... the little bugger!
    DPM Performance
    The premier online suspension and performance specialists
    W: www.dpmperformance.co.uk
    T: 01207 561606
    E: sales@dpmperformance.co.uk

  5. #4
    rodenal's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Oct 2006
    Posts
    1,982
    Yeah i wondered if the key one was just that immobilizer thing, happens occasionally - take the key out open n close the door and away i go.

    So the central locking pump isnt anythign to bother about then? i've noticed that if i lock the doors from inside then the passenger cant get out just by pulling the handle - needs me to unlock it from the switch again. Not that it bothers me enough to actually replace anythign lol
    *Gone* 1997 A3 1.6 facelift headlights, 16"1.8t Alloys, full rear tints. 110k

    You built a time machine.........out of a delorean!?!?!

  6. #5
    Uwe@Ross-Tech's Avatar
    1st Gear

    Status
    Offline
    Join Date
    Oct 2006
    Posts
    130

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO

Garage Plus, Vendor Tools vBulletin Plugins by Drive Thru Online, Inc.

Content Relevant URLs by vBSEO