rnse bluetooth coding

[ricostuart]

Hi all,

I have coded the rnse to use the new bluetooth module via radio and telephone to be "high". It seems to work well, but what I want to clarify is what the diagnostic part of the coding is for?

I have selected 5 - diagnostics via K-line which seems to work ok. But should i use 8 or 4 (can verses K-Line) as i have the MFSW and RNSE.

• 0xxx?xx: Installation List
  • 1 = Diagnostics via CAN
  • 2 = Multi-Function Steering Wheel, Diagnostics via CAN
  • 3 = Head Unit (e.g. RNS-E), Diagnostics via CAN
  • 4 = Multi-Function Steering Wheel, Head Unit (e.g. RNS-E), Diagnostics via CAN
  • 5 = Diagnostics via K-Line
  • 6 = Multi-Function Steering Wheel, Diagnostics via K-Line
  • 7 = Head Unit (e.g. RNS-E), Diagnostics via K-Line
  • 8 = Multi-Function Steering Wheel, Head Unit (e.g. RNS-E), Diagnostics via K-Lin

 

[a6_chris]

What car do you have?

K-Line settings only apply to B6/7 A4 iirc.

 

[ricostuart]

B7 S4

 

[a6_chris]

8 then.

 

[ricostuart]

cool - will test that setting in the morning! Thanks!