New fault after coding CC on a 2007 A4

[@udi A3]

Just wondered if anyone has come across this? I emailed rosstech but its bugging me. Fault was not present before coding CC, and coding was sucessfull. This is the after log after a DTC reset and a drive.

Address 01: Engine (J623-CAGA) Labels: 03L-906-022-CAG.clb
Part No SW: 03L 906 022 JN HW: 03L 906 022 B
Component: R4 2,0L EDC H01 3174
Revision: 11H01---
Coding: 010C002C02072118
Shop #: WSC 06335 123 12345
ASAM Dataset: EV_ECM20TDI03L906022JN A01004
ROD: EV_ECM20TDI03L906022JN.rod
VCID: 7AFB4C23FDCB18C86F8

1 Fault Found:
4332 - Check Coding of ECUs on Powertrain Data Bus
P1647 00 [032] - -
Intermittent - Not Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Mileage: 133693 km
Date: 2013.02.17
Time: 20:00:23

Readiness: 0 0 0 0 0

The only other code present is

Address 6D: Trunk Elect. (J605) Labels: Redir Fail!
Part No SW: 8K9 827 851 HW: 8K9 827 851
Component: J605 Master H24 0240
Revision: -------- Serial number: 8K9827851
VCID: FBF5C9277AF1A1C0F4E

Subsystem 1 - Part No SW: 8K9 827 852 HW: 8K9 827 852
Component: J756 Slave H24 0240

2 Faults Found:
16347 - Control Module - EEPROM Error
014 - Defective
Freeze Frame:
Fault Status: 01101110
Fault Priority: 1
Fault Frequency: 1
Reset counter: 57
Mileage: 133693 km
Time Indication: 0
Date: 2013.02.17
Time: 19:49:26

02242 - Rear Lid Lock Button in Luggage Compartment (E406)
008 - Implausible Signal
Freeze Frame:
Fault Status: 01101000
Fault Priority: 3
Fault Frequency: 1
Reset counter: 57
Mileage: 133693 km
Time Indication: 0
Date: 2013.02.17
Time: 19:49:26


Could they be linked? The 01 engine fault was not there before coding but the bootlid issue was.

 

[NHN]

This came up on an 07 A4, strange as one of the part numbers doesnt even fit the B7 A4, confirm the year & chassis type, maybe a B8 08?

 

[@udi A3]

Sorry it was a b8.
Rosstech suggested recoding gateway to same value again to see if fault resets.
havent tried as yet.