t111bul
Registered User
Hi,
I have a 2005 A4 B7 2.0T FSI Quattro that i have scanned and these are the code taht have come up.
012555 - Low Pressure Fuel regulation
P310B - 008 - Fuel Pressure Outside Specification - Intermittent
Freeze Frame:
Fault Status: 00101000
Fault Priority: 0
Fault Frequency: 136
Mileage: 93543 km
Time Indication: 0
Freeze Frame:
RPM: 1309 /min
Load: 28.2 %
Speed: 2.0 km/h
Temperature: 0.0°C
Temperature: 0.0°C
Absolute Pres.: 1030.0 mbar
Voltage: 14.478 V
012600 - Intake Manifold Runner Control
P3138 - 008 - Regulation Deviation
Freeze Frame:
Fault Status: 01101000
Fault Priority: 0
Fault Frequency: 1
Mileage: 99156 km
Time Indication: 0
Freeze Frame:
RPM: 3721 /min
Load: 29.4 %
Speed: 80.0 km/h
Temperature: 85.0°C
Temperature: 15.0°C
Absolute Pres.: 1000.0 mbar
Voltage: 14.224 V
008200 - Intake Manifold Flap; Bank 1
P2008 - 001 - Electrical Malfunction
Freeze Frame:
Fault Status: 01100001
Fault Priority: 0
Fault Frequency: 1
Mileage: 99156 km
Time Indication: 0
Freeze Frame:
RPM: 3717 /min
Load: 29.4 %
Speed: 81.0 km/h
Temperature: 85.0°C
Temperature: 15.0°C
Absolute Pres.: 1000.0 mbar
Voltage: 14.224 V
I am under the impression that i will be needing a new intake manifold flapper valve but would this cause the fuel pressure sensor to give a fault code?
Thanks
Tim
I have a 2005 A4 B7 2.0T FSI Quattro that i have scanned and these are the code taht have come up.
012555 - Low Pressure Fuel regulation
P310B - 008 - Fuel Pressure Outside Specification - Intermittent
Freeze Frame:
Fault Status: 00101000
Fault Priority: 0
Fault Frequency: 136
Mileage: 93543 km
Time Indication: 0
Freeze Frame:
RPM: 1309 /min
Load: 28.2 %
Speed: 2.0 km/h
Temperature: 0.0°C
Temperature: 0.0°C
Absolute Pres.: 1030.0 mbar
Voltage: 14.478 V
012600 - Intake Manifold Runner Control
P3138 - 008 - Regulation Deviation
Freeze Frame:
Fault Status: 01101000
Fault Priority: 0
Fault Frequency: 1
Mileage: 99156 km
Time Indication: 0
Freeze Frame:
RPM: 3721 /min
Load: 29.4 %
Speed: 80.0 km/h
Temperature: 85.0°C
Temperature: 15.0°C
Absolute Pres.: 1000.0 mbar
Voltage: 14.224 V
008200 - Intake Manifold Flap; Bank 1
P2008 - 001 - Electrical Malfunction
Freeze Frame:
Fault Status: 01100001
Fault Priority: 0
Fault Frequency: 1
Mileage: 99156 km
Time Indication: 0
Freeze Frame:
RPM: 3717 /min
Load: 29.4 %
Speed: 81.0 km/h
Temperature: 85.0°C
Temperature: 15.0°C
Absolute Pres.: 1000.0 mbar
Voltage: 14.224 V
I am under the impression that i will be needing a new intake manifold flapper valve but would this cause the fuel pressure sensor to give a fault code?
Thanks
Tim