Finally, here are the scans with the old cluster installed:
VCDS-Lite Version: Release 1.1
Saturday, 12 February 2011, 21:33:07:18844
Chassis Type: 8L - Audi A3/S3
Scan: 01,02,03,08,15,16,17,22,35,37,45,55,56,57,75,76
-------------------------------------------------------------------------------
Address 01: Engine Labels: 06A-906-032-AJQ.LBL
Controller: 06A 906 032 R
Component: 1.8L R4/5VT 0004
Coding: 05600
Shop #: WSC 00586
VCID: 2D2DC32BF41F
No fault code found.
Readiness: 0000 0000
-------------------------------------------------------------------------------
Address 03: ABS Brakes Labels: 1J0-907-37x-ABS.LBL
Controller: 1J0 907 379 AG
Component: ABS/EDS 20 IE CAN V009
Coding: 13504
Shop #: WSC 06435
VCID: 769F2C4741C9
No fault code found.
-------------------------------------------------------------------------------
Address 08: Auto HVAC Labels: 1J0-907-37x-ABS.LBL
Controller: 8L0 820 0
VCID: AD2D432B741F
Note: Excessive Comm Errors
-------------------------------------------------------------------------------
Address 15: Airbags Labels: 8L0-959-655-AI8.LBL
Controller: 8L0 959 655 G
Component: Airbag Front+Seite 1008
Coding: 01104
Shop #: WSC 06435
VCID: 42F780975D81
No fault code found.
-------------------------------------------------------------------------------
Address 17: Instruments Labels: 8L0-920-xxx-17.LBL
Controller: 8L0 920 980 C
Component: AB-KOMBIINSTR. VDO D09
Coding: 05444
Shop #: WSC 00586
VCID: 3319D553123B
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ AUZ7Z0X1269371
No fault code found.
-------------------------------------------------------------------------------
Address 22: AWD Labels: 02D-900-554.LBL
Controller: 02D 900 554 B
Component: HALDEX LSC ECC 0006
VCID: 1F3129E38EB3
No fault code found.
-------------------------------------------------------------------------------
Address 35: Centr. Locks Labels: 8D0-862-257.LBL
Controller: 8L0 862 257 P
Component: CV-Pump, Alarm, RC D13
Coding: 13166
Shop #: WSC 06435
VCID: 42F780975D81
5 Faults Found:
01367 - Central Locking Pump Run Time Exceeded (Likely Leak)
35-00 - -
01371 - Alarm triggered by Door Contact Switch; Driver's Side
35-00 - -
01370 - Alarm triggered by Interior Monitoring
35-00 - -
00955 - Key 1
09-00 - Adaptation Limit Surpassed
00956 - Key 2
09-00 - Adaptation Limit Surpassed
-------------------------------------------------------------------------------
Address 45: Inter. Monitor Labels: 4B0-951-173.LBL
Controller: 4B0 951 173
Component: Innenraumueberw. D03
Coding: 00001
Shop #: WSC 00005
VCID: E0B3EA1F734D
No fault code found.
-------------------------------------------------------------------------------
Address 56: Radio Labels: 8D0-035-1xx-56.LBL
Controller: 4B0 035 186
Component: Radio 0001
Coding: 00407
Shop #: WSC 00000
VCID: DDCDD3EB443F
1 Fault Found:
01044 - Control Module Incorrectly Coded
35-00 - -
End --------------------------------------------------------------------------------------------------
And the new cluster installed:
VCDS-Lite Version: Release 1.1
Saturday, 12 February 2011, 21:44:50:18844
Chassis Type: 8L - Audi A3/S3
Scan: 01,02,03,08,15,16,17,22,35,37,45,55,56,57,75,76
-------------------------------------------------------------------------------
Address 01: Engine Labels: 06A-906-032-AJQ.LBL
Controller: 06A 906 032 R
Component: 1.8L R4/5VT 0004
Coding: 05600
Shop #: WSC 00586
VCID: 2D2DC32BF41F
No fault code found.
Readiness: 0000 0000
-------------------------------------------------------------------------------
Address 03: ABS Brakes Labels: 1J0-907-37x-ABS.LBL
Controller: 1J0 907 379 AG
Component: ABS/EDS 20 IE CAN V009
Coding: 13504
Shop #: WSC 06435
VCID: 769F2C4741C9
No fault code found.
-------------------------------------------------------------------------------
Address 08: Auto HVAC Labels: 8L0-820-043-2D.LBL
Controller: 8L0 820 043 M
Component: A3 KLIMAVOLLAUTOMAT_D77
Coding: 03141
Shop #: WSC 06435
VCID: 3217D057ED21
Note: Excessive Comm Errors
-------------------------------------------------------------------------------
Address 15: Airbags Labels: 8L0-959-655-AI8.LBL
Controller: 8L0 959 655 G
Component: Airbag Front+Seite 1008
Coding: 01104
Shop #: WSC 06435
VCID: 42F780975D81
No fault code found.
-------------------------------------------------------------------------------
Address 17: Instruments Labels: 8L0-920-xxx-17.LBL
Controller: 8L0 920 980 EX
Component: AB-KOMBIINSTR. VDO D12
Coding: 05444
Shop #: WSC 00050
VCID: 8D6DE3ABD45F
XXXXXXXXXXXXXXXXX AUZ7Z0Y1572848
1 Fault Found:
01176 - Key
65-10 - Unauthorized - Intermittent
-------------------------------------------------------------------------------
Address 22: AWD Labels: 02D-900-554.LBL
Controller: 02D 900 554 B
Component: HALDEX LSC ECC 0006
VCID: 1F3129E38EB3
No fault code found.
-------------------------------------------------------------------------------
Address 35: Centr. Locks Labels: 8D0-862-257.LBL
Controller: 8L0 862 257 P
Component: CV-Pump, Alarm, RC D13
Coding: 13166
Shop #: WSC 06435
VCID: 42F780975D81
5 Faults Found:
01367 - Central Locking Pump Run Time Exceeded (Likely Leak)
35-00 - -
01371 - Alarm triggered by Door Contact Switch; Driver's Side
35-00 - -
01370 - Alarm triggered by Interior Monitoring
35-00 - -
00955 - Key 1
09-00 - Adaptation Limit Surpassed
00956 - Key 2
09-00 - Adaptation Limit Surpassed
-------------------------------------------------------------------------------
Address 45: Inter. Monitor Labels: 4B0-951-173.LBL
Controller: 4B0 951 173
Component: Innenraumueberw. D03
Coding: 00001
Shop #: WSC 00005
VCID: E0B3EA1F734D
No fault code found.
-------------------------------------------------------------------------------
Address 56: Radio Labels: 8D0-035-1xx-56.LBL
Controller: 4B0 035 186
Component: Radio 0001
Coding: 00407
Shop #: WSC 00000
VCID: DDCDD3EB443F
1 Fault Found:
01044 - Control Module Incorrectly Coded
35-00 - -
End --------------------------------------------------------------------------------------------------
The new one shows an unauthorised key in the cluster DTC's. This was cleared by simply telling the cluster via adaption 024 that it had a new key. I have to do it when refitting the old cluster too because otherwise when I reinstall it doesn't recognise the key. I should have run the auto scan after telling the new one about the key I suppose.
I also tried to look at adaption channel 060 (what is that?). The old one said it wasn't available. The new one returned a value of 1025.