vagcom/vcds cruise and front fog light coding help on my a4

[millwrx]

will be retro fitting cruise control to my 51 plate a4 avant this weekend,i have just brought a full ross-tech vcds kit from gendan automotive products,i have already brought the cruise switch,cut the cowling down,brought a secondhand steering switch module from someone on here as mine was a F MODULE and have now got a Q MODULE,have checked to make sure that i have the two switchs above the clutch/brake pedals,my car already has full dis fitted,so can someone give me a step by step guide on how to code it once i have fitted it all,the other thing i also want to do is code the front fog lights to come on with full beam,can someone help me on that one too,
thanks in advance

[millwrx]

anyone

[bez101]

VW AUDI Forum - VWAF
all u need to know in there
also why cut the cowling down and not just buy 1

Audi A4 (8E) Central Electronics (8E2/8E5)



Coding

• 0?xxx: Light Sensor
  
  • 0 = Light Sensor not installed
  • 1 = Light Sensor installed
• 0x?xx: Trailer Hitch
  
  • 0 = Trailer Hitch not installed
  • 1 = Trailer Hitch installed
• 0xx?x: Headlights
  
  • 0 = Halogen Headlights
  • 1 = Xenon Headlights
• 0xxx?: Country
  
  • 1 = Rest of World
  • 2 = Northern Countries (Finland, Sweden, Norway, Denmark)
  • 3 = USA
  • 4 = Canada

code to 4=canada for fogs on

[gurvur44]

VW AUDI Forum - VWAF
all u need to know in there
also why cut the cowling down and not just buy 1

Audi A4 (8E) Central Electronics (8E2/8E5)



Coding

• 0?xxx: Light Sensor
  
  • 0 = Light Sensor not installed
  • 1 = Light Sensor installed
• 0x?xx: Trailer Hitch
  
  • 0 = Trailer Hitch not installed
  • 1 = Trailer Hitch installed
• 0xx?x: Headlights
  
  • 0 = Halogen Headlights
  • 1 = Xenon Headlights
• 0xxx?: Country
  
  • 1 = Rest of World
  • 2 = Northern Countries (Finland, Sweden, Norway, Denmark)
  • 3 = USA
  • 4 = Canada

code to 4=canada for fogs on

I have seen this on the vag come screen after going to Select, and 07 Electronics. Its just how do i enter the code for canada? Do i put it 04? 00004? Please help!!!

[bez101]

00004 and if its not canada its 00002 1 of them will get what you want

[millwrx]

tried it today,coding the front fog lights,it wont allow you to code in the way i wanted it,eg,front fogs on with main beam,tried all four of the codes and yes they do allow the fogs to come on but only either in the off position or with side lights