- Joined
- Dec 2, 2008
- Messages
- 17,400
- Reaction score
- 1,104
- Points
- 113
17863 - Exhaust Gas Temp Sensor 1 (G235): Implausible Signal
P0113 - 35-00
I think this error was thrown due to me running the car without the middle nipple on the inlet manifold blocked!
I fitted an oil catch can on saturday and simplyfied the pipe work as per the thread on the 8L forum. Part of this involved removing the hose from the middle nipple and blocking it off but at some point on Saturday the bolt that was blocking the pipe blew out! I have since fixed it, cleared the errors and they haven't come back but just couldn't find any info on the Ross-Tech wiki?
P0113 - 35-00
I think this error was thrown due to me running the car without the middle nipple on the inlet manifold blocked!
I fitted an oil catch can on saturday and simplyfied the pipe work as per the thread on the 8L forum. Part of this involved removing the hose from the middle nipple and blocking it off but at some point on Saturday the bolt that was blocking the pipe blew out! I have since fixed it, cleared the errors and they haven't come back but just couldn't find any info on the Ross-Tech wiki?