Superchips Removal

Do you have your old chips? If so then you should be able to open your ecu and replace them. I think your model has 2 28pin chips inside so you will need to make sure you get them in the right socket and the right way round.

Feel free to give us a call if you need advice.

Paul

http://www.rstuning.co.uk

You should be able to do it yourself if you do have the chip.

All they will have done to the ECU is desoldered the original chip and soldered in a IC holder. In the holder they will have placed another small board that acts as a decoder and then in that board is the superchips chip. If you have the original then you'll need to just pull the board out of the mounted IC holder and place original chip back in.

Piece of cake, 5 minute job if you have original chip that is.