Monster MotorsportEM Tuning
Results 1 to 9 of 9
  1. #1
    imported_Gibbsy
    Guest

    Anyone used Monza dump vavles?

    Spotted this on ebay anyone know if it's good or not?
    http://cgi.ebay.co.uk/ws/eBayISAPI.d...89102&rd=1

  2. # ADS
    ADS
     
  3. #2
    Mcgough's Avatar
    4th Gear

    Status
    Offline
    Join Date
    Oct 2004
    Location
    Newcastle
    Posts
    820

    Re: Anyone used Monza dump vavles?

    when ever a item is universal, it aint gona be much good, a specific product is normally a better although not cheaper option!

  4. #3
    imported_dumpvalve
    Guest

    Re: Anyone used Monza dump vavles?

    Atmospheric valves are a no-no on the VW/Audi turbo engines. Hard to explain briefly, but it's been covered quite comprehensively on here, so do a search under "dump valves" or similar in the Tuning section. I'm uprating my diverter valve when I get the remap done in a couple of weeks at AMD - they do what they call the 'Viper' diverter valve which I think is basically a servicable Bailey DV30. The OEM Bosch diverter valves are prone to failure, but cheap to replace. You can either treat it as an expendable part and replace it every 10k or so, or do as I'm doing and go for a servicable valve. The only difference is that the stock valve uses a diaphram and most aftermarket ones - like the AMD Viper - use a piston mechanism. The AMD valve may in theory react a split-second slower than a diaphram valve, but should be far more relaible; especially under higher boost.

    Drew.

  5. #4
    foolish3uk's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Aug 2004
    Location
    in middle of nowhere
    Posts
    458

    Re: Anyone used Monza dump vavles?

    above is slightly correct, but not completely! what is for sure is that No car is made to run with Atmospheric valves!
    however i have made my a3 run perfect with a dump valve, if you want it done it is always possible, just call bailey motorsport as they have sorted a few of us out with them. steer clear of universal DV's they are normaly only bad news.

  6. #5
    imported_dumpvalve
    Guest

    Re: Anyone used Monza dump vavles?

    Well I wouldn't say that I'm a 'know it all', and I'm definately open-minded about trying new mods on cars like the atmospheric dump valve on a 1.8T.

    It just seems to me that more people have reported poor running from using an atmospheric valve than people reporting a good result first time. Good on you both for being persistant with your quest for the 'tissshhh' noise. I certainly didn't knock your efforts when you were having problems with the intstall Lee. See post "Hold the front page on dump valves" in Tuning.

    It's a matter of choice at the end of the day. If a leading manufacturer was to produce an atmospheric valve kit that was PROVEN not to reduce performance or reliability, I'd probably give it a go. I must admit, I do quite like the noise a dump valve makes. But if there was such a thing as a 100% reliable kit, surely we'd have seen some ads by now?

    Drew.

  7. #6
    foolish3uk's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Aug 2004
    Location
    in middle of nowhere
    Posts
    458

    Re: Anyone used Monza dump vavles?

    good to hear lee, my Dv has been on for quite a while now and may be getting chipped soon!!! woohooo,

  8. #7
    imported_dumpvalve
    Guest

    Re: Anyone used Monza dump vavles?

    No probs Lee, I did get a bit defensive there admittedly. I totally agree with you over the piston/diaphram debate - I'm getting the Stage 2 (remap & Milltek) at AMD in just over a week and I'm ugrading to the AMD Viper piston valve. Who's gonna notice a split-second? It's logical that a valve like a forge/bailey/viper will be more reliable under increased boost, and that's why I'm going for it. Really doubt anyone would notice the difference performance-wise.

    And yes, I bet it's quite a feeling to know you're one of very few with an audible valve. I'm tempted to go for BMC kit to amplify the diverter a bit, or I may even go for a setup like yours one day. Got my mind set on the remap at the moment though!!!

    Best regards,

    Drew.

  9. #8
    Neutral

    Status
    Offline
    Join Date
    May 2004
    Location
    East Yorkshire..GB
    Posts
    62

    Re: Anyone used Monza dump vavles?

    Yer me too Drew, i would love the same remap but buying a new house has put paid to that for a while, i envy you [img]/ubbthreads/images/graemlins/wink.gif[/img]

    Good look with it all and i hope its eveything you want.

    That BMC kit is another debate of mine hehehehe, i used to have a Mondeo 24v V6 2.5l which was 173 bhp standard, lovely car, it was the Ghia X model meaning the total works. This also had a MAF set up but i put a K&N induction kit on it and never had any MAF issues ! Sounded awesome being a V6, like a monster race bike [img]/ubbthreads/images/graemlins/grin.gif[/img]

    So again there are more people with K&N kits on their Audi's that work then there are that dont yet....... you guessed it, these kits are supposed to cause problems ????

    I dont think there are any rules in this mod game only experience !

    And in my opinnion most mods work whether it be blow off valves, Oily filter systems and so on, but we only here about the ones that dont rather then the the ones that do too.

    Please let me know how AmD change your performance and by the way your car looks well sorted, nice one.

    Take care,

    Lee.

  10. #9
    imported_dumpvalve
    Guest

    Re: Anyone used Monza dump vavles?

    Cheers mate, I'll be posting a review of the remapping on the day after I get it done - should be around the 12th Dec. Can't wait for a bit of grunt. Not long now!!!

    Drew.

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO

Garage Plus, Vendor Tools vBulletin Plugins by Drive Thru Online, Inc.

Content Relevant URLs by vBSEO