PRASINOSGIOU
Registered User
Hi everybody.my name is haris and i am from greece.you have an excellent forum.first of all sorry for my english.i have to say that here in greece nobody has done it before.if you reply to me please write like you talk to a baby so i can understand everything.
My car is an audi s3 8l 2002 model with bam engine.my car has dis(if i write it correct)the thing that tells you the radio station, rds ,temperature,etc and a radio cd concert .from what i read i have to buy 2din case code 8l0858005a ,climate control unit(very expensive) ,so if anyone can give me instructions how to cut it because i read that you can do it.rns-e must be from a4 model(please write me the codes i have to look for).from now on i am confused with some things like can bus,pins etc.if i understand correct the first thing i have to do is to buy a rns-e conversion harness (from the kufatec website).second i have to change the position of some cables.from 12 clk to 5 can h and from 13 data to 6 can l (grey cluster).i read that from nsxjr.com.it has a picture.
It also says that i have to change from (vehicle connector i) which i dont know where it is cable from 8 clk to 7 can h and from 9 data to 12 can l.correct me if i am wrong and please tell me where to find (vehicle connector i).is it anything else i have to do with cables because i read that i have to use an extra cable from somewhere to somewhere.so please correct me where i am wrong add informations of things i didnt write and i have to buy and please send some fotos for extra help if you have.help guys!!!!!And thanks again for reading my post.
My car is an audi s3 8l 2002 model with bam engine.my car has dis(if i write it correct)the thing that tells you the radio station, rds ,temperature,etc and a radio cd concert .from what i read i have to buy 2din case code 8l0858005a ,climate control unit(very expensive) ,so if anyone can give me instructions how to cut it because i read that you can do it.rns-e must be from a4 model(please write me the codes i have to look for).from now on i am confused with some things like can bus,pins etc.if i understand correct the first thing i have to do is to buy a rns-e conversion harness (from the kufatec website).second i have to change the position of some cables.from 12 clk to 5 can h and from 13 data to 6 can l (grey cluster).i read that from nsxjr.com.it has a picture.
It also says that i have to change from (vehicle connector i) which i dont know where it is cable from 8 clk to 7 can h and from 9 data to 12 can l.correct me if i am wrong and please tell me where to find (vehicle connector i).is it anything else i have to do with cables because i read that i have to use an extra cable from somewhere to somewhere.so please correct me where i am wrong add informations of things i didnt write and i have to buy and please send some fotos for extra help if you have.help guys!!!!!And thanks again for reading my post.
Last edited by a moderator: