Bluetooth added - Working but a few issues.

A

AudiLeon

Well-Known Member
VCDS Map User
Joined
Nov 24, 2009
Messages
2,315
Reaction score
214
Points
63
Location
North
I hope someone can offer some advice on this.

I've installed the bluetooth on my car, I have a RNS-E with the latest software installed.
The satnav sees the bluetooth, i can make calls and it's all fine.

I have a few issues though, I have a MFSW and when I press the left button to scroll through the numbers, it's on a limited time. After about 3 seconds of scrolling it goes off.

Also, I cannot enter 77 on vcds. It says no controller installed. Any advice welcome.

No fault codes showing on the rns-e either.
 
If you cannot enter module 77 on an A4 it is because your K-line is not connected correctly or you have not installed a genuine Audi unit.
 
If Kline wasn't connected properly, would it work right?
 
Excellent, I'll go out and double check it all.
Cheers Craig.
 
Turned out I had the Kline on the wrong wire. Oops!
So I can log into it now.

All is fine, but the time it gives you to scroll through the numbers is still really low.
 
Any ideas on this ladies and gents? I'm sure it's just a coding issue somewhere.
 
There is no coding for that

The BT module should be 0011822 for an A4 with RNS-E and MFSW
The RNS-E should be 00xxx7xx
The cluster adaptation channel 62 should be 23
The steerring wheel should be 04xxx
 
You must log in or register to reply here.

Similar threads

Triple.O.G
A few issues
Replies
0
Views
2K
Triple.O.G
Triple.O.G
J
Bluetooth Issue?
Replies
4
Views
953
cboy
cboy
DaveW
2012 A6 Bluetooth
Replies
7
Views
1K
DaveW
DaveW
P
RNSE update and Bluetooth
Replies
0
Views
2K
Pigeon
P
Ronburgandy
Navi Plus on a 2002 S3 - Few questions
Replies
0
Views
1K
Ronburgandy
Ronburgandy
Top
Back