AH FabricationsJMB Retrofits
Results 1 to 30 of 30
  1. #1
    v4rley's Avatar
    Neutral

    Status
    Offline
    Join Date
    Jan 2011
    Location
    Isle Of Wight
    Posts
    32
    As title say, unfortunatly i have had to break my S3 for spares. Reason is because the clutch failed and was the final straw after just recently fitting a new turbo, so i took the decision to break for spares to achieve more fund towards another car. Perhaps another S3 as it has been a fantastic car.

    Car spec: Audi S3 8l APY 85k

    I have spent the past couple of weeks breaking the car so i could access more parts hidden deep behind the engine and dash. Everything to sell from little to larger. Below is a list of oem optional extras and modifications avaliable:
    1. Chrome oem mirrors
    2. Yellow alcantara interior inc door cards
    3. Brembo GT 4 pot front brake calipers including nearly new discs and pads (covered less than 4k)
    4. Forge FMIC with all pipework
    5. Bilstein B14's (kit F4-HE5-8041-HO)
    6. Bosch 550cc injectors
    7. IHI VF34 (less than 4k), jabbasport manifold, downpipe and de-cat
    8. APY engine 85k, with uprated rods, end bearings etc

    Contact me with any part request and offers you have either throught PM, replying or txt 07716087266
    Unfortunatly i do work (9-5 :-)) but will try to reply asap

    Parts already sold,

    1. TIP
    2. Exhaust
    3. Passanger door blades
    4. Light switch
    5. Forge DV
    6. Haldex ECU

  2. # ADS
    ADS
    Join Date
    Always
    Location
    Global
    Posts
    Many
     
  3. #2
    6th Gear

    Status
    Offline
    Join Date
    Feb 2008
    Posts
    2,817
    Pm'd.
    2000 AMK S3, Revo'd, forge 007p, B8's, H&R's, tarox g88's, ferrodo ds2500's, and in the fastest colour



  4. #3
    Dani_B19's Avatar
    Audi-sports own special child.

    Status
    Offline
    Join Date
    Nov 2008
    Location
    Barnsley
    Posts
    7,233
    How mch for the brembos mate?
    Driving the most secretive S3 on ASN

  5. #4
    Gops's Avatar
    6th gear @7000rpm

    Status
    Offline
    Join Date
    Nov 2009
    Location
    Coventry
    Posts
    2,639
    How much for both side Indicator lamps?
    Quote Originally Posted by <tuffty/> View Post
    its either mapped or broken...

  6. #5
    tonks s3's Avatar
    Neutral

    Status
    Offline
    Join Date
    May 2012
    Posts
    33
    how much for chrome mirrors? cheers

  7. #6
    scubadriver's Avatar
    Reverse Gear

    Status
    Offline
    Join Date
    May 2011
    Posts
    18
    Do you still have the glove box lid? How much do you want?

  8. #7
    v4rley's Avatar
    Neutral

    Status
    Offline
    Join Date
    Jan 2011
    Location
    Isle Of Wight
    Posts
    32
    Pm'd Rear lights sold

  9. #8
    Smokey_clark's Avatar
    12th Gear

    Status
    Offline
    Join Date
    Jan 2010
    Location
    Nr Bath
    Posts
    211
    How much for the brembos mate? plus can you put me down for FMIC if the provisional seller falls through.

  10. #9
    v4rley's Avatar
    Neutral

    Status
    Offline
    Join Date
    Jan 2011
    Location
    Isle Of Wight
    Posts
    32
    Hi Smokey_clarkReally looking for 550 for the brembos, with the discs and pads being virually new and including delivery. Will put you down for seconds on the fmic.

  11. #10
    Erf
    1st Gear

    Status
    Offline
    Join Date
    Oct 2006
    Location
    Kingston
    Posts
    234
    How much for the haldex pre charge pump?
    Silver 2002 S3 - Alloy Mirrors - RNS-E - Parrot MKI9200 - Beesting Ariel - Stealth Catch Can - S2000 Air Filter - R32 Rear ARB

    Oyster Grey 2008 A6 Avant S-Line 2.0TDI DPF

  12. #11
    Wind Deflector Trend-setter

    Status
    Offline
    Join Date
    Nov 2011
    Location
    Horsham
    Posts
    389
    Price on mani, downpipe and sports cat. Include postage please cheers.
    2000 Plate Audi S3 1.8T Santorin Blue - 261.0BHP - 255.1LB/FT on Custom Parsons Performance remap, Forge 007p DV, Red DogBush, Milltek non-res, Lowered 35mm Apex springs, Badger5 TIP/cone filter/heat shield, Powerflex'd, Large FMIC, Relentless Downpipe, Parsons Decat and lots of love.
    On gearbox number 4.
    Further modification to come..

  13. #12
    v4rley's Avatar
    Neutral

    Status
    Offline
    Join Date
    Jan 2011
    Location
    Isle Of Wight
    Posts
    32
    Pm'd

  14. #13
    4th Gear

    Status
    Offline
    Join Date
    Oct 2011
    Posts
    760
    fmic how much?

  15. #14
    1st Gear

    Status
    Offline
    Join Date
    Nov 2011
    Posts
    138
    Couple of little bits needed:Inside the drivers door handle (interior) there is a removable part with a screw at the back and a clip at the front, i need this if possiblePotentially need a full clove box if in good conditionDrivers mirror glass if tinted/heated and good conditionPiano black cubby hole with hinged lid (goes under climate control) if you have one.Let me know which of these bits you have, Thanks.

  16. #15
    Ginge's Avatar
    It's never fast enough !

    Status
    Offline
    Join Date
    Jan 2011
    Location
    Hemel Hempstead (home) / Loughborough (UNI)
    Posts
    192
    Hello, how much for the rear suspension spring mounts? (If you still have them and they aren't worn through like mine ...) Thanks, Tom.
    99' S3 APY currently just 007p, Badger 5 TIP, Customised Miltek non-res cat-back, Jetex cone, H&R Springs and Bilstein B8 Dampers ... 3" Downpipe, AH Fabrications FMIC and R-Tech Re-map on the way

  17. #16
    v4rley's Avatar
    Neutral

    Status
    Offline
    Join Date
    Jan 2011
    Location
    Isle Of Wight
    Posts
    32
    Jezzy: fmic how much?
    Asking for 450 full setup including crash bar

    cheers

  18. #17
    v4rley's Avatar
    Neutral

    Status
    Offline
    Join Date
    Jan 2011
    Location
    Isle Of Wight
    Posts
    32
    mcpickering: Couple of little bits needed:Inside the drivers door handle (interior) there is a removable part with a screw at the back and a clip at the front, i need this if possiblePotentially need a full clove box if in good conditionDrivers mirror glass if tinted/heated and good conditionPiano black cubby hole with hinged lid (goes under climate control) if you have one.Let me know which of these bits you have, Thanks.
    Hi,
    would like to retain door handle to go with door cards. Glove box in great condition on scratches, only down side is usual problem of broken hinge on n / s hardly noticeable but best to mention, only discovered when i did a usual problem check list, would it still be of interest? Mirror glass not heated :-( and compartment sold. Soz i couldn't be of more help, but let me know if glove box of interest.
    Cheers

  19. #18
    v4rley's Avatar
    Neutral

    Status
    Offline
    Join Date
    Jan 2011
    Location
    Isle Of Wight
    Posts
    32
    ginge: Hello, how much for the rear suspension spring mounts? (If you still have them and they aren't worn through like mine ...) Thanks, Tom.
    Mine are pretty worn through too so wouldn't be much use
    cheers

  20. #19
    Westy's Avatar
    Double Dark Side! Diesel & 8P

    Status
    Offline
    Join Date
    Dec 2008
    Location
    Cambridgeshire sometimes Hertfordshire
    Posts
    17,281
    Don't suppose you have wheel spacers?
    8P A3 TDI - 220bhp - 335lbft
    A3 Maintenance Thread
    Bye bye S3 you will be missed.
    S3 Build Thread







  21. #20
    v4rley's Avatar
    Neutral

    Status
    Offline
    Join Date
    Jan 2011
    Location
    Isle Of Wight
    Posts
    32
    Westy: Don't suppose you have wheel spacers?
    only cheap 5mm ones like they sell in halfords

  22. #21
    Lizard-Racing's Avatar
    DTM

    Status
    Offline
    Join Date
    Apr 2011
    Location
    Hampshire
    Posts
    151
    Where abouts are you located? Is the boot lid in good shape with original paint?
    2005 DTM|Quattro|Phantom black|HTA3076 turbo|Pag Parts turbo manifold|INA Engineering custom 8 injector manifold|Custom Garrett 900hp intercooler|Mahle Motorsport 83mm forged pistons|IE Tuscan forged rods|Autotech HPFP|Tial wastegate|S3 Injectors|3" Downpipe and full stainless exhaust|Stage 3 Southbend clutch|AP Coilovers|Ultra Race strut brace|H & R ARBs|Forge 6 pot calipers|Bi Xenons|Multifunction steering wheel|Memory seat|Cruise control|Power fold mirrors|Black 19" Cades Berns|235/35 Toyos

  23. #22
    Yohan87's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    May 2011
    Posts
    405
    How much for the engine loom (uncut)? Cheers

  24. #23
    v4rley's Avatar
    Neutral

    Status
    Offline
    Join Date
    Jan 2011
    Location
    Isle Of Wight
    Posts
    32
    How much for the engine loom (uncut)? Cheers
    Loom available and not cut, pm sent

  25. #24
    1st Gear

    Status
    Offline
    Join Date
    Apr 2011
    Location
    London, United Kingdom, United Kingdom
    Posts
    115
    how much u after for the turbo, downpipe, manifold and injectors

  26. #25
    Neutral

    Status
    Offline
    Join Date
    May 2012
    Posts
    30
    How much for the rear arb if you still have it?

  27. #26
    Neutral

    Status
    Offline
    Join Date
    Jun 2012
    Posts
    30
    Hi do you have the standard headunit avalible and 6disc changer and battery cover?Ifso how much Cheers Danny

  28. #27
    v4rley's Avatar
    Neutral

    Status
    Offline
    Join Date
    Jan 2011
    Location
    Isle Of Wight
    Posts
    32
    PM'd

  29. #28
    Schlaag's Avatar
    Bwah

    Status
    Offline
    Join Date
    Jul 2007
    Location
    Kent
    Posts
    295
    are those 18" genuine audi alloys? if so are they for sale too?

    2001 AMK Dolphin Grey S3

  30. #29
    v4rley's Avatar
    Neutral

    Status
    Offline
    Join Date
    Jan 2011
    Location
    Isle Of Wight
    Posts
    32
    Genuine wheels, already sold

  31. #30
    Reverse Gear

    Status
    Offline
    Join Date
    Jul 2008
    Posts
    9
    Hi, do you still have headlamps and rear tailgate wash-wipe and roof aeriel for sale ? hope so thanks, graeme

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO

Garage Plus, Vendor Tools vBulletin Plugins by Drive Thru Online, Inc.

Content Relevant URLs by vBSEO